12 μC and 6 μC charges are given to the two conducting plates having same cross-sectional area and placed face to face close to each other as shown in the figure. The resulting charge distribution in μC on surfaces A, B, C and D are respectively,
9, 3, − 3, 9
For two parallel conducting plates placed close together, the field inside each conductor must vanish. This forces the two outermost surfaces to carry equal charges, each equal to half the total charge, while the facing inner surfaces carry equal and opposite charges.
Step 1 — Outer surfaces: \(q_A = q_D = \dfrac{12 + 6}{2} = 9\ \mu\text{C}\).
Step 2 — Inner surface of the first plate: \(q_B = 12 - 9 = 3\ \mu\text{C}\).
Step 3 — Inner surface of the second plate: \(q_C = 6 - 9 = -3\ \mu\text{C}\), which is equal and opposite to \(q_B\), as required.
The set 3, 9, − 9, 3 gives outer charges of 3 μC instead of half the total, 9 μC. The set 6, 6, − 6, 12 has unequal outer charges, and 6, 6, 3, 3 has inner charges that are not equal and opposite, so the field inside the plates would not vanish.
9, 3, − 3, 9 option is correct.
A uniform time-varying magnetic field exists in a circular region of radius $R$, directed perpendicular into the plane of the paper, increasing at a constant rate $\alpha$. A straight conducting rod of length $2R$ is placed exactly along the diameter of the circular region (passing through the centre). Find the induced emf across the rod.

There is a ring of radius $r$ having linear charge density $\lambda$ and rotating with a uniform angular velocity $\omega$. The magnitude of the magnetic field produced by this ring at its own centre would be
($\mu_0 = \text{permeability of air}$)
A charged particle of charge q and mass m is placed at a distance 2R from the centre of a vertical cylindrical region of radius R where magnetic field varies as \(\vec{B}=(4t^{2}-2t+6)\hat{k}\), where t is time. Then which of the following statement(s) is/are true ?
Using a variable frequency a.c. voltage source the maximum current measured in the given LCR circuit is 50 mA for $V = 5\sin(100t)$ The values of L and R are shown in the figure. The capacitance of the capacitor (C) used is ___________ $\mu\text{F}$. 