All Exams Test series for 1 year @ ₹349 only
Question

An electric dipole of dipole moment \(\vec{p}\) is placed at the origin of the co-ordinate system along the z-axis. The amount of work required to move a charge ‘q’ from the point (a, 0, 0) to the point (0, 0, a) is,

The correct answer is

\(\dfrac{pq}{4\pi\varepsilon_0 a^2}\)

The potential of a short dipole at distance r and angle θ from its axis is \(V = \dfrac{p\cos\theta}{4\pi\varepsilon_0 r^2}\). The work done by an external agent in moving a charge slowly is \(W = q\,(V_f - V_i)\).

Step 1 — The point (a, 0, 0) lies on the x-axis, perpendicular to the dipole axis (equatorial line), so θ = 90° and \(V_i = 0\).

Step 2 — The point (0, 0, a) lies on the z-axis, along the dipole moment (axial line), so θ = 0 and \(V_f = \dfrac{p}{4\pi\varepsilon_0 a^2}\).

Step 3 — \(W = q\left(\dfrac{p}{4\pi\varepsilon_0 a^2} - 0\right) = \dfrac{pq}{4\pi\varepsilon_0 a^2}\).

A zero value would hold only if both points were on the equatorial plane. \(\dfrac{pq}{4\pi\varepsilon_0 a}\) has the wrong dependence on distance (a dipole potential falls as the inverse square), and \(\dfrac{-pq}{4\pi\varepsilon_0 a^2}\) has the wrong sign because the charge moves from zero potential to a positive potential.

\(\dfrac{pq}{4\pi\varepsilon_0 a^2}\) option is correct.

Was this answer helpful?

Similar Questions

  1. A charged particle of charge q and mass m is placed at a distance 2R from the centre of a vertical cylindrical region of radius R where magnetic field varies as \(\vec{B}=(4t^{2}-2t+6)\hat{k}\), where t is time. Then which of the following statement(s) is/are true ?

  2. The figure shows two identical parallel plate capacitors A and B of capacitances C connected to a battery. The key K is initially closed. The switch is now opened and the free spaces between the plates of the capacitors are filled with a dielectric constant 3. Then which of the following statement(s) is/are true ?

    Battery V across capacitor A, with key K joining capacitor B in parallel
  3. An amount of charge Q passes through a coil of resistance R. If the current in the coil decreases to zero at a uniform rate during time T, then the amount of heat generated in the coil will be,

  4. A bar magnet falls from rest under gravity through the centre of a horizontal ring of conducting wire as shown in figure. Which of the following graph best represents the speed (v) vs. time (t) graph of the bar magnet ?

    Vertical bar magnet falling along the axis of a horizontal conducting ring
  5. A circular coil is placed near a current carrying conductor, both lying on the plane of the paper. The current is flowing through the conductor in such a way that the induced current in the loop is clockwise as shown in the figure. The current in the wire is,

    Circular loop with clockwise arrows to the left of a straight vertical wire marked I, Up at top and Down at bottom
  6. In an experiment on a circuit as shown in the figure, the voltmeter shows 8 V reading. The resistance of the voltmeter is,

    Voltmeter across a 160 ohm resistor in series with a 20 ohm resistor and a 10 V cell
  7. A charged particle in a uniform magnetic field \(\vec{B} = B_0\hat{k}\) starts moving from the origin with velocity \(v = 3\hat{i} + 4\hat{k}\) m/s. The trajectory of the particle and the time t at which it reaches 2 m above x-y plane are,

  8. The figure represents two equipotential lines in x-y plane for an electric field. The x-component Ex of the electric field in space between these equipotential lines is,

    Two parallel straight equipotential lines of 2 V and 4 V on an x-y grid in cm
  9. A wire carrying a steady current I is kept in the x-y plane along the curve \(y = A\sin\left(\dfrac{2\pi}{\lambda}x\right)\).

    A magnetic field B exists in the z-direction. The magnitude of the magnetic force in the portion of the wire between x = 0 and x = λ is

  10. 12 μC and 6 μC charges are given to the two conducting plates having same cross-sectional area and placed face to face close to each other as shown in the figure. The resulting charge distribution in μC on surfaces A, B, C and D are respectively,

    Two parallel conducting plates carrying 12 μC and 6 μC, with surfaces labelled A, B (first plate) and C, D (second plate)

Important Questions from Electricity and Magnetism

  1. A short bar magnet placed with its axis at $30^\circ$ with an external field of 800 Gauss, experiences a torque of 0.016 N.m. The work done in moving it from most stable to most unstable position is $\alpha \times 10^{-3} \text{ J}$. The value of $\alpha$ is ______.
  2. An electromagnetic wave of frequency $100\text{ MHz}$ propagates through a medium of conductivity, $\sigma = 10\text{ mho/m}$. The ratio of maximum conduction current density to maximum displacement current density is __________.
    $\left[ \text{Take } \frac{1}{4\pi\varepsilon_0} = 9 \times 10^9\text{ Nm}^2\text{/C}^2 \right]$
  3. An inductor stores $16\text{ J}$ of magnetic field energy and dissipates $32\text{ W}$ of thermal energy due to its resistance when an a.c. current of $2\text{ A}$ (rms) and frequency $50\text{ Hz}$ flows through it. The ratio of inductive reactance to its resistance is _________. ($\pi = 3.14$)
  4. A simple pendulum made of mass 10 g and a metallic wire of length 10 cm is suspended vertically in a uniform magnetic field of 2 T. The magnetic field direction is perpendicular to the plane of oscillations of the pendulum. If the pendulum is released from an angle of $60^\circ$ with vertical, then maximum induced EMF between the point of suspension and point of oscillation is ___________ mV. (Take $g = 10\text{ m/s}^2$)
  5. Using a variable frequency a.c. voltage source the maximum current measured in the given LCR circuit is 50 mA for $V = 5\sin(100t)$ The values of L and R are shown in the figure. The capacitance of the capacitor (C) used is ___________ $\mu\text{F}$. 

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App