SSC JE Syllabus 2026 covers General Intelligence and Reasoning, General Awareness, and General Engineering subjects in Paper 1, followed by a branch-specific General Engineering paper in Paper 2. Candidates can choose Civil & Structural, Electrical, or Mechanical Engineering according to their educational qualification and post preference. SSC JE 2026 Paper 1 and Paper 2 are conducted in CBT mode. The engineering syllabus is based approximately on the Diploma level of the respective engineering discipline.
| Particulars | Details |
|---|---|
| Exam Name | SSC Junior Engineer Examination 2026 |
| Conducting Body | Staff Selection Commission |
| Notification Release Date | September 2, 2026 |
| Application Dates | September 2 to September 22, 2026 |
| Exam Mode | Computer-Based Test |
| Paper 1 | General Intelligence & Reasoning, General Awareness, General Engineering |
| Paper 2 | General Engineering |
| Paper 1 Marks | 200 |
| Paper 2 Marks | 300 |
| Paper 1 Duration | 2 Hours |
| Paper 2 Duration | 2 Hours |
| Paper 1 Negative Marking | 0.25 marks for each wrong answer |
| Paper 2 Negative Marking | 1 mark for each wrong answer |
| Paper 1 Schedule | October/November 2026 |
| Paper 2 Schedule | December 2026 |
| Engineering Level | Approximately Diploma level |
SSC JE syllabus is divided into two papers covering general aptitude and technical engineering knowledge. While Paper 1 includes common subjects along with General Engineering, Paper 2 focuses entirely on the engineering discipline selected by the candidate.
| Exam Stage | Subject / Discipline | Questions | Marks | Duration | Negative Marking |
|---|---|---|---|---|---|
| Paper 1 | General Intelligence & Reasoning | 50 | 50 | 2 Hours | 0.25 marks per wrong answer |
| Paper 1 | General Awareness | 50 | 50 | 2 Hours | 0.25 marks per wrong answer |
| Paper 1 | General Engineering | 100 | 100 | 2 Hours | 0.25 marks per wrong answer |
| Paper 2 | General Engineering (Selected Discipline) | 100 | 300 | 2 Hours | 1 mark per wrong answer |
Paper 1 carries a total of 200 marks, while Paper 2 carries 300 marks. In Paper 2, each question carries 3 marks and 1 mark is deducted for every incorrect answer.
SSC JE Paper 1 syllabus includes General Intelligence & Reasoning, General Awareness, and General Engineering. Candidates are tested on their reasoning ability, awareness of current and general topics, and basic technical knowledge of their selected engineering discipline.
| Subject | Questions | Marks |
|---|---|---|
| General Intelligence & Reasoning | 50 | 50 |
| General Awareness | 50 | 50 |
| General Engineering | 100 | 100 |
| Total | 200 | 200 |
SSC JE General Intelligence and Reasoning syllabus tests verbal and non-verbal reasoning ability, logical thinking, observation, and problem-solving skills. Candidates should focus on commonly asked reasoning concepts and practice questions regularly.
| Topic | Important Areas |
|---|---|
| Analogy | Verbal and figure analogy |
| Similarities & Differences | Classification and comparison |
| Space Visualization | Spatial orientation and visualization |
| Visual Memory | Observation-based questions |
| Blood Relations | Family relationships |
| Arithmetical Reasoning | Basic logical calculations |
| Series | Number and non-verbal series |
| Classification | Verbal and figure classification |
| Problem Solving | Logical and analytical problems |
| Decision Making | Situational reasoning |
| Observation | Pattern and figure-based questions |
SSC JE General Awareness covers current affairs as well as static subjects such as History, Geography, Polity, Economy, Science, and general knowledge. Candidates should regularly follow important national and international developments along with basic factual topics.
| Topic | Important Areas |
|---|---|
| Current Affairs | National and international events |
| History | Ancient, Medieval and Modern Indian History |
| Geography | India and World Geography |
| Polity | Indian Constitution and basic political system |
| Economy | Basic economic concepts and developments |
| General Science | Physics, Chemistry and Biology |
| Static GK | Important facts, institutions, awards and events |
| Scientific Research | Major developments and discoveries |
SSC JE General Engineering section covers the technical syllabus of the selected engineering discipline.
| Topic | Topics Covered | Questions |
|---|---|---|
| Building Materials | Cement, concrete, bricks, timber, steel | Not Fixed |
| Estimating & Costing | Estimation, costing, rates and valuation | Not Fixed |
| Surveying | Chain, compass, levelling and theodolite | Not Fixed |
| Soil Mechanics | Soil properties, classification, permeability and shear strength | Not Fixed |
| Hydraulics | Fluid properties, pipe flow and open-channel flow | Not Fixed |
| Irrigation | Irrigation methods, canals, dams and water management | Not Fixed |
| Environmental Engineering | Water supply, sewage, pollution and waste management | Not Fixed |
| Transportation Engineering | Highway, railway and transportation basics | Not Fixed |
| Concrete Technology | Concrete ingredients, mix design, properties and testing | Not Fixed |
| Theory of Structures | Beams, trusses, columns and structural analysis | Not Fixed |
| RCC Design | Beams, slabs, columns and foundations | Not Fixed |
| Steel Design | Steel structures, connections, beams and columns | Not Fixed |
| Topic | Topics Covered | Questions |
|---|---|---|
| Basic Electrical Engineering | Current, voltage, power, energy and basic laws | Not Fixed |
| Circuit Theory | AC/DC circuits, network theorems and circuit analysis | Not Fixed |
| Electrical Measurements | Measuring instruments, errors and measurements | Not Fixed |
| Electrical Machines | Transformers, DC machines and AC machines | Not Fixed |
| Generation | Methods and basics of power generation | Not Fixed |
| Transmission & Distribution | Transmission lines and distribution systems | Not Fixed |
| Power Systems | Components, protection and basic analysis | Not Fixed |
| Utilization of Electrical Energy | Heating, lighting and electrical traction | Not Fixed |
| Basic Electronics | Semiconductor devices and basic circuits | Not Fixed |
| Installation | Electrical wiring, installation and safety | Not Fixed |
| Control Systems | Control concepts, systems and feedback | Not Fixed |
| Topic | Topics Covered | Questions |
|---|---|---|
| Engineering Mechanics | Force, equilibrium, friction and motion | Not Fixed |
| Strength of Materials | Stress, strain, bending, shear and torsion | Not Fixed |
| Theory of Machines | Mechanisms, gears, motion and machine elements | Not Fixed |
| Thermodynamics | Laws, properties, processes and cycles | Not Fixed |
| IC Engines | Components, working, performance and cycles | Not Fixed |
| Steam & Boilers | Boilers, steam generation and cycles | Not Fixed |
| Refrigeration | Refrigeration systems, cycles and applications | Not Fixed |
| Fluid Mechanics | Fluid properties, pressure and fluid flow | Not Fixed |
| Hydraulic Machinery | Pumps, turbines and hydraulic machines | Not Fixed |
| Compressors | Types, working and performance | Not Fixed |
| Production Engineering | Production methods, machining and processes | Not Fixed |
| Manufacturing | Casting, welding, forming and machining | Not Fixed |
| Engineering Materials | Properties, classification and applications | Not Fixed |
SSC JE Paper 2 focuses completely on the technical subject selected by the candidate. The paper consists of 100 questions carrying 300 marks, with each question carrying 3 marks. There is a negative marking of 1 mark for every wrong answer in Paper 2. Candidates should therefore attempt questions carefully and avoid unnecessary guessing.
SSC JE Civil & Structural Engineering syllabus covers core civil engineering subjects such as Building Materials, Surveying, Soil Mechanics, Hydraulics, RCC, Steel Design, and Theory of Structures. Candidates should prepare both conceptual and numerical questions from the major engineering topics.
| Subject | Important Topics |
|---|---|
| Building Materials | Cement, bricks, timber, stones, concrete and other construction materials |
| Estimating & Costing | Estimation, costing, rate analysis and valuation |
| Surveying | Chain surveying, compass surveying, levelling, theodolite and plane table |
| Soil Mechanics | Soil properties, classification, permeability, consolidation and shear strength |
| Hydraulics | Fluid properties, flow, pressure, Bernoulli's theorem and open channel flow |
| Irrigation | Irrigation methods, canals, dams and water resources |
| Environmental Engineering | Water supply, treatment, sewage and pollution control |
| Transportation Engineering | Roads, railways, highways and traffic engineering |
| Concrete Technology | Concrete properties, mix design and testing |
| Theory of Structures | Structural analysis, beams, trusses and columns |
| RCC Design | Reinforced concrete structures and design principles |
| Steel Design | Steel structures, connections and design concepts |
SSC JE Electrical Engineering syllabus includes Basic Electrical Engineering, Circuit Theory, Electrical Machines, Measurements, Power Systems, Transmission and Distribution, and Basic Electronics. Numerical problem-solving and fundamental concepts are important for this section.
| Subject | Important Topics |
|---|---|
| Basic Electrical Engineering | Current, voltage, resistance, power and electrical laws |
| Circuit Theory | DC and AC circuits, network theorems and circuit analysis |
| Electrical Measurements | Measuring instruments, errors and measurement techniques |
| Electrical Machines | Transformers, DC machines and AC machines |
| Generation | Conventional and non-conventional power generation |
| Transmission & Distribution | Transmission systems, distribution networks and protection |
| Power Systems | Power system components and basic protection |
| Utilization of Electrical Energy | Heating, lighting and electrical drives |
| Basic Electronics | Diodes, transistors and basic electronic circuits |
| Installation | Electrical wiring, safety and installation practices |
| Control Systems | Basic control system concepts and components |
SSC JE Mechanical Engineering syllabus includes Engineering Mechanics, Strength of Materials, Theory of Machines, Thermodynamics, IC Engines, Refrigeration, Fluid Mechanics, Hydraulic Machinery, and Production Engineering.
| Subject | Important Topics |
|---|---|
| Engineering Mechanics | Force, friction, work, energy and equilibrium |
| Strength of Materials | Stress, strain, bending, shear force and torsion |
| Theory of Machines | Mechanisms, motion, gears and balancing |
| Thermodynamics | Laws of thermodynamics, properties, cycles and entropy |
| IC Engines | Engine performance, combustion, cooling and lubrication |
| Steam & Boilers | Boilers, steam generation and steam cycles |
| Refrigeration | Refrigeration cycles, refrigerants and air conditioning |
| Fluid Mechanics | Fluid properties, fluid statics, flow and Bernoulli's theorem |
| Hydraulic Machinery | Hydraulic turbines and centrifugal pumps |
| Compressors | Air compressors and related concepts |
| Production Engineering | Machining, casting, welding, forming and manufacturing |
| Manufacturing | Manufacturing processes and machine tools |
| Engineering Materials | Metals, alloys, heat treatment and material properties |
SSC JE important topics should be prioritized according to the candidate's engineering discipline and previous question trends. Candidates should first strengthen the fundamental concepts and then solve numerical and previous-year questions.
| Section | Important Topics |
|---|---|
| Reasoning | Analogy, series, classification, blood relations, visual reasoning |
| General Awareness | Current affairs, history, geography, polity, science |
| Civil Engineering | Surveying, Soil Mechanics, RCC, Hydraulics, Building Materials |
| Electrical Engineering | Circuit Theory, Electrical Machines, Power Systems, Measurements |
| Mechanical Engineering | Thermodynamics, SOM, Fluid Mechanics, IC Engines, Production Engineering |
SSC JE preparation requires standard technical books along with dedicated practice material for General Intelligence and General Awareness. Candidates should avoid using too many books and focus on completing one reliable source for each subject.
SSC JE candidates can use standard reasoning books covering verbal and non-verbal reasoning, analogy, classification, series, coding-decoding, blood relations, and other frequently asked topics.
SSC JE candidates should combine a standard General Knowledge book with current affairs resources to cover both static GK and recent developments.
SSC JE preparation should focus on the syllabus, technical subjects, and regular practice. A balanced approach to Paper 1 and Paper 2 can improve accuracy and performance.
SSC JE exam pattern consists of two Computer-Based Papers. Paper 1 tests reasoning, General Awareness, and General Engineering, while Paper 2 tests the technical discipline selected by the candidate.
| Paper | Subjects | Questions | Marks | Duration | Negative Marking |
|---|---|---|---|---|---|
| Paper 1 | General Intelligence & Reasoning | 50 | 50 | 2 Hours | 0.25 mark |
| Paper 1 | General Awareness | 50 | 50 | 2 Hours | 0.25 mark |
| Paper 1 | General Engineering | 100 | 100 | 2 Hours | 0.25 mark |
| Paper 1 Total | — | 200 | 200 | 2 Hours | — |
| Paper 2 | General Engineering | 100 | 300 | 2 Hours | 1 mark |
Paper 1 contains 200 questions for 200 marks, while Paper 2 contains 100 questions for 300 marks. The engineering subject in Paper 2 corresponds to the discipline selected by the candidate.
SSC JE Paper 1 and Paper 2 differ in terms of subjects, marks, and technical depth. Paper 1 combines general and technical sections, whereas Paper 2 is entirely technical.
| Feature | Paper 1 | Paper 2 |
|---|---|---|
| Mode | CBT | CBT |
| Main Focus | Reasoning, General Awareness & Engineering | Engineering |
| Questions | 200 | 100 |
| Marks | 200 | 300 |
| Duration | 2 Hours | 2 Hours |
| Engineering Level | Approximately Diploma level | Approximately Diploma level |
| Negative Marking | 0.25 mark per wrong answer | 1 mark per wrong answer |
SSC JE Syllabus 2026 provides a well-defined framework that assesses both analytical ability and specialized engineering knowledge. Its approach ensures candidates are tested on both conceptual understanding and technical proficiency, enabling focused preparation for Junior Engineer recruitment process.
| Relevant Link | ||
|---|---|---|
| SSC JE 2026 Result | SSC JE 2026 Answer Key | SSC JE 2026 Previous Year Papers |
| SSC JE 2026 Eligibility | SSC JE 2026 Salary | SSC JE 2026 Mock test |
Ques: Is SSC JE syllabus same for Paper 1 and Paper 2?
Ans: No. SSC JE Paper 1 includes Reasoning, General Awareness, and General Engineering, while Paper 2 focuses only on the selected engineering discipline.
Ques: Which SSC JE paper has more weightage for technical subjects?
Ans: SSC JE Paper 2 carries 300 marks and consists entirely of General Engineering questions, making technical preparation important for the exam.
Ques: Does SSC JE syllabus include numerical questions?
Ans: Yes. Engineering topics such as Circuit Theory, Thermodynamics, Fluid Mechanics, Surveying, Soil Mechanics, and Strength of Materials require numerical and problem-solving practice.
Ques: How should I cover SSC JE syllabus effectively?
Ans: SSC JE candidates should first cover technical concepts, then practise topic-wise questions, revise weak areas, and regularly attempt mock tests.
Ques: Can I prepare for SSC JE Paper 2 without studying Paper 1 topics?
Ans: Yes. Paper 2 is technical-only, but candidates still need to prepare the Reasoning and General Awareness sections separately for Paper 1.
Download the PREPP App and attempt FREE SSC JE Mock Tests and get complete study material!
Comments