Match List I with List II Choose the correct answer from the options given below:LIST I LIST II A. Power I. dBi B. Gain II. Watts C. Resistance III. Henry D. Inductance IV. Ohm
A-II, B-I, C-IV, D-III
To match the terms in List I with their correct units from List II, we need to understand the basic definitions and units associated with each term.
- Power: Power is defined as the rate at which work is done or energy is transferred. The standard unit of power is the Watt (W).
Hence, Power – Watts (II). - Gain: Gain in the context of electronics, often particularly in antennas and sound systems, is measured in decibels. The gain relative to an isotropic antenna is measured in dBi.
Hence, Gain – dBi (I). - Resistance: Resistance is a measure of the opposition to the flow of electric current. The unit of electrical resistance is the Ohm (Ω).
Hence, Resistance – Ohm (IV). - Inductance: Inductance is the property of an electrical conductor by which a change in current in the conductor creates an electromotive force. The standard unit of inductance is the Henry (H).
Hence, Inductance – Henry (III).
Combining these observations, we can match each term in List I with its appropriate unit in List II:
A-II: Power - Watts
B-I: Gain - dBi
C-IV: Resistance - Ohm
D-III: Inductance - Henry
The correct answer is A-II, B-I, C-IV, D-III, which corresponds to the given option:
A-II, B-I, C-IV, D-III
Similar Questions
Power absorbed by an element for t = 10 sec, if the current magnitude is 2e-0.1t and the voltage across the element is \(V=6\frac{di}{dt}\), the absorbed power is :
A. - 0.325 Watts
B. - 2.4 e-0.2(10) Watts
C. 0.325 Watts
D. 2.4 e-0.2(10) Watts
E. 0.625 Watts
choose the correct answer from the options given below :
Important Questions from Network Elements
Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as
Which of the following value of a complex current wave is equal to the square root of the sum of the square of the RMS value of the individual components?
What is the SI unit of electric charge?
Calculate the total DC resistance of a 100 metre roll of 2.5 mm2 copper wire if the resistivity of copper at 20° C is 1.72 × 10-8 Ω metre
If three 5 μF capacitors are connected in parallel, then the net capacitance is
