In Lever, mechanical advantage is the ratio of ________.
Load to effort
Mechanical advantage of a machine compares what it lifts or overcomes with what is put in to operate it.
MA = Load ÷ Effort
A lever with a value above 1 gives a force gain, so a small effort can balance a larger load.
Check: Effort ÷ Load is simply the inverse of this ratio, so it cannot be the mechanical advantage.
Hence, Load to effort.
In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?
The distance of the effort from the fulcrum is called the ________.
If we compare the effort arm length with the load arm length in a class 1 lever, ________
In Lever, mechanical advantage is the ratio of _______.
If we compare the effort arm length with the load arm length in a Class 2 lever, _______.
A uniform meter scale weighs 50g. It is pivoted at the 70cm mark. Where should a 40 g mass be placed so that the scale is in equilibrium?
Find the mechanical advantage of a pulley system if it has an efficiency of 60%. The load lifts by 3 m when the rope is pulled by 12 m.
In a certain gear train, the driver has 24 teeth while the follower has 8 teeth. For every ______ turns of the driver, the follower turns 36 times.
In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?
The distance of the effort from the fulcrum is called the ________.