In a certain gear train, the driver has 24 teeth while the follower has 8 teeth. For every ______ turns of the driver, the follower turns 36 times.
12
In a gear train, the speeds of the two gears are inversely proportional to their numbers of teeth: driver turns × driver teeth = follower turns × follower teeth.
Speed ratio = 24 : 8 = 3 : 1, so the follower turns 3 times for every turn of the driver.
Follower turns = 36, so the driver turns = 36 ÷ 3 = 12
Check: 12 × 24 = 288 and 36 × 8 = 288, so the teeth engaged match on both gears.
Hence, 12.
In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?
The distance of the effort from the fulcrum is called the ________.
If we compare the effort arm length with the load arm length in a class 1 lever, ________
In Lever, mechanical advantage is the ratio of _______.
If we compare the effort arm length with the load arm length in a Class 2 lever, _______.
A uniform meter scale weighs 50g. It is pivoted at the 70cm mark. Where should a 40 g mass be placed so that the scale is in equilibrium?
Find the mechanical advantage of a pulley system if it has an efficiency of 60%. The load lifts by 3 m when the rope is pulled by 12 m.
In Lever, mechanical advantage is the ratio of ________.
In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?
The distance of the effort from the fulcrum is called the ________.