All Exams Test series for 1 year @ ₹349 only
Question

During an experiment, a student mistakenly identifies the lever's load arm as the part where force is always applied. Which concept best corrects this misunderstanding?

The correct answer is

The effort arm is where force is applied

A lever has three main parts: the fulcrum, which is the fixed pivot, the effort, which is the force the user applies, and the load, which is the weight being moved. Each is joined by an arm, measured from the fulcrum.

The effort arm is the distance from the fulcrum to the point where the user applies the force, and the load arm is the distance from the fulcrum to the load. So the student has confused the load arm with the effort arm.

The statements that call the base the force direction or the fulcrum the point of force application mix up the parts, and the load arm does not support the fulcrum. Check: effort goes with the effort arm and load goes with the load arm.

Hence, The effort arm is where force is applied.

Was this answer helpful?

Similar Questions

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  4. The distance of the effort from the fulcrum is called the ________.

  5. If we compare the effort arm length with the load arm length in a class 1 lever, ________

  6. In Lever, mechanical advantage is the ratio of _______.

  7. If we compare the effort arm length with the load arm length in a Class 2 lever, _______.

  8. A uniform meter scale weighs 50g. It is pivoted at the 70cm mark. Where should a 40 g mass be placed so that the scale is in equilibrium?

  9. Find the mechanical advantage of a pulley system if it has an efficiency of 60%. The load lifts by 3 m when the rope is pulled by 12 m.

  10. In a certain gear train, the driver has 24 teeth while the follower has 8 teeth. For every ______ turns of the driver, the follower turns 36 times.


Important Questions from Levers and Simple Machines

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. Choose the option which does NOT belong to the category of simple machine
  4. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  5. The distance of the effort from the fulcrum is called the ________.

Need Expert Advice?
Upcoming Exams
RRB Paramedical
November 23, 2026
RRB Staff Nurse
November 23, 2026
Test Series
RRB ALP img
Railways
RRB ALP 2026 Mock Test series
1035 Tests 1 Tests Free
1768 Attempts
4.3(258)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App