All Exams Test series for 1 year @ ₹349 only
Question

A worker uses a pulley system to lift a load vertically upwards with a constant speed. If the effort applied is 100 N and the load is 200 N, which statement best describes the system?

The correct answer is

The system has a mechanical advantage of two

Mechanical advantage is the ratio of the load lifted to the effort applied: \(MA = \frac{\text{Load}}{\text{Effort}}\). A pulley system gives a force gain when the effort is smaller than the load.

Here \(MA = \frac{200}{100} = 2\). The constant speed only shows that the forces are balanced, so it does not change this ratio.

A ratio of one would need equal effort and load, but the effort is 100 N against a load of 200 N, so the effort is smaller, not greater. Nothing given shows the velocity ratio, so the machine cannot be called ideal. The mechanical advantage of two is the valid description.

Hence, The system has a mechanical advantage of two.

Was this answer helpful?

Similar Questions

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  4. The distance of the effort from the fulcrum is called the ________.

  5. If we compare the effort arm length with the load arm length in a class 1 lever, ________

  6. In Lever, mechanical advantage is the ratio of _______.

  7. If we compare the effort arm length with the load arm length in a Class 2 lever, _______.

  8. A uniform meter scale weighs 50g. It is pivoted at the 70cm mark. Where should a 40 g mass be placed so that the scale is in equilibrium?

  9. Find the mechanical advantage of a pulley system if it has an efficiency of 60%. The load lifts by 3 m when the rope is pulled by 12 m.

  10. In a certain gear train, the driver has 24 teeth while the follower has 8 teeth. For every ______ turns of the driver, the follower turns 36 times.


Important Questions from Levers and Simple Machines

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. Choose the option which does NOT belong to the category of simple machine
  4. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  5. The distance of the effort from the fulcrum is called the ________.

Need Expert Advice?
Upcoming Exams
RRB Paramedical
November 23, 2026
RRB Staff Nurse
November 23, 2026
Test Series
RRB ALP img
Railways
RRB ALP 2026 Mock Test series
1035 Tests 1 Tests Free
1773 Attempts
4.3(258)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App