All Exams Test series for 1 year @ ₹349 only
Question

A ramp is used to load boxes onto a truck. If the ramp is made longer but the height remains the same, what will happen to the mechanical advantage and why?

The correct answer is

The mechanical advantage increases because the input force is spread over a greater distance

A ramp is an inclined plane. Its ideal mechanical advantage is the length of the slope divided by the vertical height, \(MA = \frac{L}{h}\).

With the height fixed and the length increased, the ratio L/h becomes larger, so the mechanical advantage rises. The same work is done to lift the box, but it is spread over a longer path, so a smaller push is needed.

A longer ramp with the same height is less steep, not steeper, and the height has not changed, so the statements that the advantage falls or that the ramp is higher do not hold.

Check: a ramp of length 4 m and height 1 m gives 4, while a ramp of 6 m and the same height gives 6.

Hence, The mechanical advantage increases because the input force is spread over a greater distance.

Was this answer helpful?

Similar Questions

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  4. The distance of the effort from the fulcrum is called the ________.

  5. If we compare the effort arm length with the load arm length in a class 1 lever, ________

  6. In Lever, mechanical advantage is the ratio of _______.

  7. If we compare the effort arm length with the load arm length in a Class 2 lever, _______.

  8. A uniform meter scale weighs 50g. It is pivoted at the 70cm mark. Where should a 40 g mass be placed so that the scale is in equilibrium?

  9. Find the mechanical advantage of a pulley system if it has an efficiency of 60%. The load lifts by 3 m when the rope is pulled by 12 m.

  10. In a certain gear train, the driver has 24 teeth while the follower has 8 teeth. For every ______ turns of the driver, the follower turns 36 times.


Important Questions from Levers and Simple Machines

  1. The force applied to overcome a load is called ______.
  2. In class 1 levers, effort and load moves in ______.
  3. Choose the option which does NOT belong to the category of simple machine
  4. In a lever-operated compressor servicing tool (Class 1 lever), if the load arm length is decreased while the effort arm length is kept constant, what will be the effect on its mechanical advantage?

  5. The distance of the effort from the fulcrum is called the ________.

Need Expert Advice?
Upcoming Exams
RRB Staff Nurse
November 23, 2026
RRB Paramedical
November 23, 2026
Test Series
RRB ALP img
Railways
RRB ALP 2026 Mock Test series
1035 Tests 1 Tests Free
1774 Attempts
4.3(258)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App