Which practice helps maintain the accuracy of a steel rule during daily use?
Avoid dropping on floor
The question asks which practice helps maintain the accuracy of a steel rule during daily use. Let's discuss each option to determine the correct answer:
- Measure hot metal parts: Measuring hot metal parts can lead to inaccuracies because the metal expands when heated, causing incorrect readings on the steel rule. This practice does not maintain the accuracy of the steel rule.
- Wash after every use: While keeping the steel rule clean is beneficial for removing dirt and debris, washing it frequently could introduce moisture, leading to rusting if not dried properly. This does not directly influence maintaining accuracy.
- Oil every hour of use: Oiling is primarily used to prevent rust and not directly related to maintaining accuracy. Excessive oiling can make it slippery and hard to handle.
- Avoid dropping on the floor: Dropping a steel rule on the floor can cause dents, bends, or damage to the edges, which can impair its accuracy and precision. Therefore, this practice is essential in maintaining the accuracy of the steel rule.
The correct answer is to avoid dropping the steel rule on the floor. This practice prevents physical damage that could lead to inaccurate measurements.
Similar Questions
Which of the following best describes a common use of a protractor in the ITI Fitter trade?
To check the accuracy of a spirit level, after taking the first reading, the level is rotated by:
Which part of an outside micrometer remains fixed and supports the workpiece during measurement?
When evaluating surface plate construction for use in a humid environment, which factor is most important to consider?
After setting a sine bar with slip gauges and placing the workpiece, which operation is performed to verify correct angle setting?
A technician needs to inspect the internal diameter of a cylinder bore with high accuracy. Which combination of components in a dial bore gauge ensures accurate measurement and effective alignment inside the bore?
- What is the role of the locking mechanism on a micrometer depth gauge?
How does the base of a micrometer depth gauge differ from that of a standard micrometer?
Which measuring method is used to examine the concentric alignment of a chuck mounted on a back plate?
A measuring instrument must be selected for verifying the small diameter (d) of a finely finished Morse taper. Which option provides the most accurate and reliable measurement for this application?
Important Questions from Measuring Tools
The least count of a screw gauge is ______.
A Vernier caliper has $20$ divisions on its Vernier scale, which coincide with $19$ divisions on the main scale. If one main scale division (MSD) is $0.5$ mm, what is the least count of the instrument?
The Vernier Calliper’s advantage over the micrometer is that
______ is a precision instrument meant for measuring angles to an accuracy of 5 minutes.
In bevel protractor, graduation is marked from 0° to ______.
