Which part of an outside micrometer remains fixed and supports the workpiece during measurement?
Anvil
To answer the question, "Which part of an outside micrometer remains fixed and supports the workpiece during measurement?" let's examine the different components of an outside micrometer and their functions:
- Anvil: The anvil is a critical part of an outside micrometer that remains fixed and provides support to the workpiece during measurement. It is a flat surface that the workpiece rests against for accurate measurement. Therefore, the correct answer is the "Anvil."
- Ratchet Stop: This component ensures that the spindle is advanced slowly and consistently to apply uniform pressure while taking measurements. It prevents excess pressure from being applied to the workpiece, which could result in inaccurate readings. However, it does not provide support to the workpiece.
- Spindle: The spindle is a movable part opposite the anvil. It is adjusted to contact the workpiece and measures its length. Though integral to the measuring process, the spindle does not support the workpiece.
- Thimble: The thimble is part of the micrometer that you rotate to move the spindle. It has a scale that works with the sleeve to give precise measurements. It plays no role in supporting the workpiece during measurement.
In conclusion, the anvil is the part of the outside micrometer that remains fixed and supports the workpiece during measurement, ensuring accuracy and stability. It is essential for maintaining consistent positioning of the object being measured.
Similar Questions
Which of the following best describes a common use of a protractor in the ITI Fitter trade?
To check the accuracy of a spirit level, after taking the first reading, the level is rotated by:
When evaluating surface plate construction for use in a humid environment, which factor is most important to consider?
After setting a sine bar with slip gauges and placing the workpiece, which operation is performed to verify correct angle setting?
A technician needs to inspect the internal diameter of a cylinder bore with high accuracy. Which combination of components in a dial bore gauge ensures accurate measurement and effective alignment inside the bore?
- What is the role of the locking mechanism on a micrometer depth gauge?
How does the base of a micrometer depth gauge differ from that of a standard micrometer?
Which measuring method is used to examine the concentric alignment of a chuck mounted on a back plate?
A measuring instrument must be selected for verifying the small diameter (d) of a finely finished Morse taper. Which option provides the most accurate and reliable measurement for this application?
Which practice helps maintain the accuracy of a steel rule during daily use?
Important Questions from Measuring Tools
The least count of a screw gauge is ______.
A Vernier caliper has $20$ divisions on its Vernier scale, which coincide with $19$ divisions on the main scale. If one main scale division (MSD) is $0.5$ mm, what is the least count of the instrument?
The Vernier Calliper’s advantage over the micrometer is that
______ is a precision instrument meant for measuring angles to an accuracy of 5 minutes.
In bevel protractor, graduation is marked from 0° to ______.
