How does the base of a micrometer depth gauge differ from that of a standard micrometer?
It is flat and wide for stability on surfaces
The question asks how the base of a micrometer depth gauge differs from that of a standard micrometer. Let's examine the options given and determine the correct answer based on the functionality and design of a micrometer depth gauge.
- Option: It is circular to fit different holes
This option suggests that the base is circular, which would be more typical of a tool designed to fit into varying hole sizes. However, this design would not necessarily provide the stability needed for a depth gauge. Therefore, this option is incorrect. - Option: It is flat and wide for stability on surfaces
A micrometer depth gauge is used to measure the depth of a step or recess. For such measurements, the tool needs to rest stably on a flat surface. Hence, the base of a micrometer depth gauge is designed to be flat and wide to provide that necessary stability. This option is correct. - Option: It is tapered for narrow slots
A tapered base might allow for the gauge to fit into narrow slots, but it would not facilitate the stable measurements of depth across a flat surface. Hence, this option is incorrect for a depth gauge. - Option: It is C-shaped for hand grip
This option suggests a design more suitable for holding rather than measuring. A C-shaped base does not contribute to the stability required for accurate depth measurement. Therefore, this option is also incorrect.
In conclusion, the base of a micrometer depth gauge is indeed flat and wide for stability on surfaces. This design ensures that the gauge remains stable against the reference surface, allowing for precise and reliable depth measurements.
Similar Questions
Which of the following best describes a common use of a protractor in the ITI Fitter trade?
To check the accuracy of a spirit level, after taking the first reading, the level is rotated by:
Which part of an outside micrometer remains fixed and supports the workpiece during measurement?
When evaluating surface plate construction for use in a humid environment, which factor is most important to consider?
After setting a sine bar with slip gauges and placing the workpiece, which operation is performed to verify correct angle setting?
A technician needs to inspect the internal diameter of a cylinder bore with high accuracy. Which combination of components in a dial bore gauge ensures accurate measurement and effective alignment inside the bore?
- What is the role of the locking mechanism on a micrometer depth gauge?
Which measuring method is used to examine the concentric alignment of a chuck mounted on a back plate?
A measuring instrument must be selected for verifying the small diameter (d) of a finely finished Morse taper. Which option provides the most accurate and reliable measurement for this application?
Which practice helps maintain the accuracy of a steel rule during daily use?
Important Questions from Measuring Tools
The least count of a screw gauge is ______.
A Vernier caliper has $20$ divisions on its Vernier scale, which coincide with $19$ divisions on the main scale. If one main scale division (MSD) is $0.5$ mm, what is the least count of the instrument?
The Vernier Calliper’s advantage over the micrometer is that
______ is a precision instrument meant for measuring angles to an accuracy of 5 minutes.
In bevel protractor, graduation is marked from 0° to ______.
