The common-emitter (CE) configuration of a transistor is most widely used as a/an:
Voltage Amplifier
The common-emitter (CE) configuration of a transistor is most widely used as a Voltage Amplifier. Let's understand why this is the correct answer and rule out the other options.
-
Common-Emitter Configuration:
- The CE configuration is popular in amplifying applications because it provides optimal voltage gain.
- It has the ability to produce a significant increase in voltage while maintaining a moderate current gain.
-
Voltage Amplifier:
- The primary function of a voltage amplifier is to increase the amplitude of the input AC signal.
- In CE configuration, the phase of the output voltage is 180 degrees out of phase with the input, but it is amplified in amplitude.
Hence, the common-emitter configuration is widely utilized as a voltage amplifier in electronic circuits.
-
Impedance Matcher:
- Though transistors can be used to match impedances, the CE configuration is not primarily used for impedance matching because it does not offer the lowest output impedance compared to common collector (CC) or emitter follower configurations.
-
Passive Filter:
- CE configuration is not used as a filter. Passive filters typically use resistors, capacitors, and inductors to pass certain frequency signals.
-
Rectifier:
- Rectifiers are used to convert AC signals to DC. Transistors in CE configuration are not used for rectification.
Therefore, based on the characteristics and applications of the common-emitter configuration, the correct answer is Voltage Amplifier.
Similar Questions
Identify the component shown in the image below:
The emitter current of a transistor is 1 mA. If 1% of the emitted current carriers are lost in the base recombination, what is the value β? Identify from the given options.
Heat sink of a power transistor can be used for:
In case of an AC input signal in CE Transistor Load line can be given by a plot of
How does the construction of a MOSFET help to achieve high input impedance?
While diagnosing an NPN BJT in a SOT-23 package, your multimeter positive probe (+) is locked on the Base (Pin 1). Measuring to Pin 3 reads 0.6 V, while measuring to Pin 2 reads 0.68 V. Which pin is the Emitter?
Which type of charge carriers mainly control current in a Field Effect Transistor (FET)?
What is the purpose of the base region in an NPN transistor?
Why are transistors preferred over mechanical switches for rapid switching operations?
In the output characteristics of a common-emitter configuration, a family of curves is obtained by varying VCE while keeping which quantity fixed? (Symbols have their usual meaning.)
Important Questions from Transistors
A transistor has ______ PN junctions
Which of the following is not true for a BJT?
A transistor amplifier with proper biasing has the following measured parameters:
Input resistance = 1 kΩ, Output resistance = 10 kΩ, Current gain = 90.
Identity the biasing configuration.
The change of output wave shape from the input wave shape of an amplifier is known as
Identify the component shown in the image below:
