Match the LIST-I with LIST-II Choose the correct answer from the options given below:LIST-I LIST-II A. RAID level 1 I. bit-interleaved parity organization B. RAID level 2 II. disk mirroring C. RAID level 3 III. block-interleaved parity organization D. RAID level 4 IV. ECC organization
A-II, B-IV, C-I, D-III
RAID (Redundant Array of Independent Disks) levels are distinguished by how they add redundancy across several disks. The classic description (Silberschatz, Operating System Concepts) gives each level a characteristic organisation.
A. RAID level 1 keeps an exact duplicate copy of every disk, i.e. disk mirroring → II.
B. RAID level 2 uses memory-style error-correcting codes (Hamming code bits stored on extra disks), i.e. ECC organization → IV.
C. RAID level 3 stripes data at the bit/byte level and keeps a single parity disk, i.e. bit-interleaved parity organization → I.
D. RAID level 4 stripes data in blocks and keeps a dedicated parity disk for the blocks, i.e. block-interleaved parity organization → III.
The matching A-II, B-I, C-IV, D-III swaps levels 2 and 3 (bit parity is level 3, ECC is level 2). A-III, B-IV, C-I, D-II wrongly gives mirroring to level 4 and block parity to level 1, and A-IV, B-III, C-II, D-I assigns mirroring to level 3, which is incorrect.
A-II, B-IV, C-I, D-III option is correct.
Consider a disk with 16384 bytes per track having a rotation time of 16 msec and average seek time of 40 msec. What is the time in msec to read a block of 1024 bytes from this disk ?
Which RAID level is appropriate for storing the log file of a ticket booking system where a huge database update is required?
If the disk platters rotate at 5400 rpm (revolutions per minute), then approximately what is the maximum rotational delay ?
For the disk described in the passage, assume the platters rotate at 5400 rpm and one complete track is transferred per revolution. Taking 1 KByte = 1024 bytes, what is the data transfer rate?
Consider a disk pack with 32 surfaces, 64 tracks and 512 sectors per pack. 256 bytes of data are stored in a bit serial manner in a sector. The number of bits required to specify a particular sector in the disk is
Which of the following can be said about primary storage in comparison with secondary storage?