Codes :List – I (Devices) List – II (Characteristics) a. BJT i. Voltage controlled negative resistance b. MOSFET ii. High current gain c. Tunnel diode iii. Voltage regulation d. Zener diode iv. High input impedance
a-ii, b-iv, c-i, d-iii
Each device is paired with the property it is chosen for.
(a) BJT → (ii) high current gain. A bipolar transistor is a current-controlled device: a small base current controls a much larger collector current,
\(I_{C}=\beta I_{B}\qquad\beta\approx100\ \text{to}\ 300\)
That amplification of current is its defining characteristic, and it comes from the thin, lightly doped base through which almost every injected carrier passes.
(b) MOSFET → (iv) high input impedance. The gate is insulated from the channel by a layer of SiO2, so in the steady state no gate current flows at all — only leakage of the order of picoamps. The input resistance reaches \(10^{12}\ \Omega\) or more, which is why MOSFETs are the input devices of electrometers and why CMOS logic draws no static input current.
(c) Tunnel diode → (i) voltage-controlled negative resistance. Both sides are doped degenerately, so the junction is only about 10 nm wide and carriers tunnel through it at small forward bias. As the bias rises further the tunnelling window closes, and the current falls while the voltage rises — a region where
\(\dfrac{dI}{dV}\lt0\)
It is called voltage-controlled because the current is a single-valued function of voltage (an N-shaped characteristic), which is what allows the device to oscillate or to act as a very fast switch.
(d) Zener diode → (iii) voltage regulation. Operated in reverse breakdown, it holds an almost constant voltage across itself over a wide range of current — the basis of every shunt regulator and voltage reference.
| Device | Controlled by | Signature |
|---|---|---|
| BJT | Base current | β of 100–300 |
| MOSFET | Gate voltage | Insulated gate, no input current |
| Tunnel diode | — | Negative resistance region |
| Zener diode | — | Constant V in breakdown |
The order (ii), (iv), (i), (iii) is option 1.
The BJT/MOSFET contrast is the one to carry away : current-controlled with high gain but a real input current, against voltage-controlled with essentially infinite input resistance. That single difference decides which device is used at the front of an amplifier and why CMOS, not bipolar, dominates large-scale digital integration.
Hence, the correct match is a-ii, b-iv, c-i, d-iii.
Match the following :
| List – I | List – II |
| a. n · p | i. 26 mV / I |
| b. p-n diode | ii. \(\dfrac{2}{|V_{P}|}\sqrt{I_{DS}\cdot I_{DSS}}\) |
| c. JFET | iii. ID = K(VGS – VGST)2 |
| d. enhancement MOSFET | iv. mass action law |
Codes :
| List-I (Relief Materials) | List-II (Color Code) |
| A. Shelter | I. Yellow |
| B. Clothes | II. Khaki |
| C. Food | III. Red |
| D. Medicine | IV. Brown |
Which of the following is NOT a state function or state variable in a thermodynamic system?