Consider a CSMA/CD network that transmits data at the rate of 100 Mbps over a 1 Kilometre cable with no repeater. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable.
20000
In CSMA/CD a sender must still be transmitting when a collision from the far end returns, so the transmission time of the smallest frame must be at least the round-trip propagation time: \(\dfrac{L}{B} \ge 2\dfrac{d}{v}\).
Step 1 — Frame length L = 1250 bytes = \(1250 \times 8 = 10000\) bits.
Step 2 — Transmission time = \(\dfrac{10000}{100 \times 10^{6}} = 100\ \mu\text{s}\).
Step 3 — Round-trip time = 100 μs, so one-way propagation time = 50 μs for d = 1 km.
Step 4 — \(v = \dfrac{1\ \text{km}}{50 \times 10^{-6}\ \text{s}} = 20000\ \text{km/s}\).
8000, 12000 and 16000 km/s would give one-way delays of 125 μs, about 83 μs and 62.5 μs, which require minimum frames larger than 1250 bytes at 100 Mbps.
20000 option is correct.
The minimum frame length for 10 Mbps Ethernet is _______ bytes and maximum is _______ bytes.
The network using CSMA/CD has a bandwidth of 20 mbps. If the maximum propagation time is 25μ sec (microsecond), what is the minimum size of the frame?
The number of bits used for addressing in Gigabit Ethernet is _______.
Assume the host uses a correctly assigned, universally administered individual Ethernet address and that addresses are not duplicated or spoofed. The host is connected to a department network, which is part of a university network, which in turn is part of the Internet. The largest listed network within which this Ethernet address is unique is:
A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network?
Which of the following communication modes supports two-way traffic, but in only one direction at a time?