Question
Associate the terms in Group-I with the building hardware in Group-II Group-I Group-II P Parliamentary 1 Bar Q Aldrop 2 Lock R Panic 3 Hinge S Mortise 4 Bolt
The correct answer is
P-3, Q-4, R-1, S-2
Matching Building Hardware Terms: Group I & II
This solution identifies the correct building hardware corresponding to each term listed in Group I.
Understanding Hardware Associations
- P: Parliamentary is associated with 3: Hinge. Specific types of hinges, like pivot hinges, are sometimes referred to as parliamentary hinges.
- Q: Aldrop is correctly matched with 4: Bolt. An Aldrop is a type of sliding bolt or fastener used on doors.
- R: Panic refers to hardware used on emergency exits, specifically matching with 1: Bar (i.e., panic bar or push bar).
- S: Mortise is associated with 2: Lock. A mortise lock is a lock mechanism installed within a pocket cut into the door's edge.
Correct Pairings Summary
Based on these associations, the correct matching is:
P-3, Q-4, R-1, S-2
Was this answer helpful?
Important Questions from Building Construction Techniques
Match the brick masonry bond type in Group I with the corresponding illustration in Group II
Group I Group II (P) Rat Trap (1) 
(Q) English (2) 
(R) Flemish (3) 
(S) Stretcher (4) 
(5) 
- Cold joint' refers to the
- Match the Elements in Group - I with their Applications in Group - II
Group - I Group - II P Bracket 1 Door Q Baluster 2 Dome R Key stone 3 Cornice S Holdfast 4 Arch 5 Staircase - Match the Vibrator Types in Group-I with their related Areas of Application in Group-II
Group-I Group-II P Needle Vibrator 1 Concrete Pavement Q Shutter Vibrator 2 Pre-cast Concrete Unit R Surface Vibrator 3 Beam-Column Junction S Table Vibrator 4 Retaining Wall 5 Slip Forming - Match the type of Temporary Structures in Group - I with their corresponding Functions in Group - II
Group-I Group-II P Scaffolding 1 To support unsafe structure Q Formwork 2 To support platforms for workmen and materials at raised height during construction R Shoring 3 Removal of water from pits S Underpinning 4 Mould for RCC Structure 5 Strengthening the existing foundation
Need Expert Advice?
