Which technology is used by a CD-ROM drive to read data in computer systems?
Laser technology
CD-ROM (Compact Disc Read-Only Memory) drives use Laser Technology to read data. Here's a detailed explanation of how this technology works and why the other options are incorrect:
-
Laser Technology:
- CD-ROMs store data in the form of tiny pits and lands (flat areas) on the disc surface.
- A laser beam is directed at the disc surface to read the data. The laser light reflects off the lands and is scattered by the pits, which allows the drive to detect the binary data encoded on the disc.
- Laser technology is essential in distinguishing between pits and lands due to its precision, allowing the CD-ROM drive to interpret the binary data accurately.
This option is correct since laser technology is designed to read the optical storage on CDs.
-
Ultraviolet Light Technology:
- Ultraviolet light is not used in CD-ROM drives. It is primarily used in chemical processes, sterilization, and identification in certain scientific fields.
Therefore, this option is incorrect.
-
Electrical Contacts:
- Electrical contacts are used in connections and switches, where physical contact between conductive elements completes a circuit.
- They have no application in reading data from CDs, which is done optically rather than through electrical circuits.
This option is incorrect.
-
Magnetic Head:
- Magnetic heads are used in devices like hard drives and floppy disks that rely on magnetic storage.
- CDs use optical storage rather than magnetic, so a magnetic head would be ineffective in reading a CD.
Thus, this option is incorrect.
In conclusion, the correct answer is Laser Technology because it is the only method suitable for reading the optical data stored on a CD-ROM.
Similar Questions
How many pins are present on a standard PATA ribbon cable header for desktop hard drives?
How does Hard Disk store data in a desktop computer?
A technician connecting a desktop PC to a network switch in a modern office environment should use a __________ cable terminated with __________ connectors to establish a stable local connection.
Which of the following statements about HDDs is correct in computer hardware technology?
What is the first safety step before dismantling a desktop computer?
How should screws be tightened when mounting a Hard Disk Drive (HDD) in a desktop computer?
To connect a local computer to a network switch, a technician must crimp an 8-pin __________ connector onto the Ethernet cable and plug it directly into the switch's matching __________.
Which motherboard component is used to connect storage devices like HDD or SSD in desktop computer system?
What is the function of the heat sink on the motherboard in a computer system?
What is the purpose of the I/O shield supplied with a motherboard?
Important Questions from Computer Hardware and Networking
Which of the following is NOT an application software?
When a computer is switched on, it performs a set of diagnostic tests to see if the hardware is working properly. This process is referred to as ______.
Which type of UPS also known as standby UPS or line preferred?
Which of the following computer hardware contains a laser?
First In First Out (FIFO) is used in -
