What is the first safety step before dismantling a desktop computer?
Switch off and unplug the power supply
To ensure safety while dismantling a desktop computer, the very first step is crucial. Let's go through the options to clarify which step should be prioritized:
- Switch off and unplug the power supply: This is the most critical first step for safety. Electronic components and circuits inside a computer can retain charge and pose a risk of electric shock. Switching off, and more importantly, unplugging ensures that there is no power running through the components, making it safe to work on. This precaution prevents electrical hazards and potential damage to internal components.
- Remove RAM from all RAM slots: This step only relates to hardware configuration tasks when the system is already safe to work with. It is inappropriate as a first step since the power needs to be disconnected beforehand to avoid static damage or electric shock.
- Open the cabinet: Before actually opening the computer case, it is essential that the power is switched off and the device is unplugged. This ensures that you don't accidentally make contact with live components upon opening.
- Disconnect data cables: Like removing RAM, this step is valid only after ensuring the computer is powered down and unplugged. Disconnecting data cables while the computer is powered might damage the hardware or cause data loss.
Thus, the first and foremost safety step before dismantling a desktop computer is Switch off and unplug the power supply. By doing this, you ensure a safe working environment and prevent damage to the computer.
Similar Questions
How many pins are present on a standard PATA ribbon cable header for desktop hard drives?
How does Hard Disk store data in a desktop computer?
A technician connecting a desktop PC to a network switch in a modern office environment should use a __________ cable terminated with __________ connectors to establish a stable local connection.
Which of the following statements about HDDs is correct in computer hardware technology?
How should screws be tightened when mounting a Hard Disk Drive (HDD) in a desktop computer?
To connect a local computer to a network switch, a technician must crimp an 8-pin __________ connector onto the Ethernet cable and plug it directly into the switch's matching __________.
Which motherboard component is used to connect storage devices like HDD or SSD in desktop computer system?
What is the function of the heat sink on the motherboard in a computer system?
What is the purpose of the I/O shield supplied with a motherboard?
Which of the following best describes the Internet of Things?
Important Questions from Computer Hardware and Networking
Which of the following is NOT an application software?
When a computer is switched on, it performs a set of diagnostic tests to see if the hardware is working properly. This process is referred to as ______.
Which type of UPS also known as standby UPS or line preferred?
Which of the following computer hardware contains a laser?
First In First Out (FIFO) is used in -
