Switch off circuit.
The correct answer is to switch off the circuit before replacing a fuse.
Replacing a fuse involves working with electricity, which can be extremely dangerous. Before attempting any work on an electrical circuit, the first and most crucial step is to ensure the power is completely disconnected. This prevents the risk of electric shock, which can cause serious injury or even death.
The other options are incorrect and irrelevant to safely replacing a fuse. Wearing a safety belt or standing on a stool are not related to electrical safety. While rubber gloves offer some level of protection against electrical shock, they are not a substitute for turning off the power supply. The primary safety precaution is always to isolate the power source completely.
Similar Questions
Which of the following is an effective way to prevent electrical accidents in the workplace?
Which of the following is NOT one of the 5S principles?
What is the first step when encountering a system failure in a workplace?
Which of the following is a key electrical safety tip in a workshop?
What should be the position of the 'OFF' marking on a fireman's switch?
- Identify the correct pair of Personal Protective Equipment (PPE) categories based on the nature of the hazard.
- Which of the following statement(s) is/are true regarding electrical safety practices? 1. It is safe to plug multi-outlet bars into other multi-outlet bars as long as the total load does not exceed the rated capacity of the outlets. 2. Electrical equipment should not be used near wet surfaces or when your hands are wet, and power cords should be protected by avoiding placement under rugs or mats.
- Which of the following statements are true regarding general safety in the workshop? Statement 1: Use any available tool for the job, even if it is not the correct one. Statement 2: Keep the tools in their proper place after use. Statement 3: Clean the machine while it is still running. Statement 4: Replace worn-out or damaged tools immediately.
- What is the first step in providing first aid for a minor burn?
- What is the most effective way to avoid mechanical hazards when operating large and dangerous machines?
Important Questions from Occupational Safety and Health
Which of the following aspects is not a part of safe work place?
Which of the following cannot be used as a safety device?
The only thing that can keep you safe consistently is
Hoists and lifts used for carrying persons shall be fitted with
Which of the following is an effective way to prevent electrical accidents in the workplace?
