To prevent accidental startup during maintenance
The primary purpose of implementing Lockout/Tagout (LOTO) procedures when working on a DC motor, or any machinery for that matter, is to prevent accidental startup during maintenance or repair. This is crucial for ensuring the safety of personnel working on the equipment.
Let's examine why the other options are incorrect:
- To increase motor efficiency: LOTO procedures have nothing to do with the operational efficiency of the motor. Efficiency improvements are achieved through other methods, such as proper lubrication and maintenance.
- To measure motor speed: Motor speed is measured using instruments like tachometers or speed sensors, not LOTO procedures.
- To improve motor cooling: Motor cooling is addressed through design features and proper ventilation, not through LOTO procedures.
In summary, LOTO is a safety procedure, not a performance-enhancing or measurement technique. Its sole purpose is to isolate the energy source (electrical power in this case) to the DC motor and prevent any unexpected energization, thus protecting workers from injury during maintenance and repair.
Similar Questions
What is the first step when encountering a system failure in a workplace?
Which of the following is a key electrical safety tip in a workshop?
What should be the position of the 'OFF' marking on a fireman's switch?
- Identify the correct pair of Personal Protective Equipment (PPE) categories based on the nature of the hazard.
- Which of the following statement(s) is/are true regarding electrical safety practices? 1. It is safe to plug multi-outlet bars into other multi-outlet bars as long as the total load does not exceed the rated capacity of the outlets. 2. Electrical equipment should not be used near wet surfaces or when your hands are wet, and power cords should be protected by avoiding placement under rugs or mats.
- What is the recommended action before replacing a fuse?
- Which of the following statements are true regarding general safety in the workshop? Statement 1: Use any available tool for the job, even if it is not the correct one. Statement 2: Keep the tools in their proper place after use. Statement 3: Clean the machine while it is still running. Statement 4: Replace worn-out or damaged tools immediately.
- What is the first step in providing first aid for a minor burn?
- What is the most effective way to avoid mechanical hazards when operating large and dangerous machines?
- Raising the head to straighten the neck is called ______.
Important Questions from Occupational Safety and Health
Which of the following aspects is not a part of safe work place?
Which of the following cannot be used as a safety device?
The only thing that can keep you safe consistently is
Hoists and lifts used for carrying persons shall be fitted with
What is the first step when encountering a system failure in a workplace?
