Run cool water over the burn
The correct first step in providing first aid for a minor burn is to run cool water over the burn. This is option 2.
The other options are incorrect for several reasons:
- Popping blisters (Option 1): This can introduce infection and further damage the already injured skin.
- Covering the burn with a thick cloth (Option 3): While covering the burn *after* cooling it is a good idea to protect it and prevent infection, initially it's crucial to cool the burn to minimize damage. A thick cloth may trap heat.
- Applying butter to the burn (Option 4): This is a common misconception but is absolutely wrong. Butter traps heat and can increase the risk of infection. It also makes it difficult to clean the burn properly.
Cooling the burn immediately under cool (not ice cold) running water for 10-20 minutes helps to reduce pain, inflammation, and the depth of the burn. This is the most critical initial step to prevent further injury and promote healing.
Similar Questions
Which of the following is an effective way to prevent electrical accidents in the workplace?
Which of the following is NOT one of the 5S principles?
What is the first step when encountering a system failure in a workplace?
Which of the following is a key electrical safety tip in a workshop?
What should be the position of the 'OFF' marking on a fireman's switch?
- Identify the correct pair of Personal Protective Equipment (PPE) categories based on the nature of the hazard.
- Which of the following statement(s) is/are true regarding electrical safety practices? 1. It is safe to plug multi-outlet bars into other multi-outlet bars as long as the total load does not exceed the rated capacity of the outlets. 2. Electrical equipment should not be used near wet surfaces or when your hands are wet, and power cords should be protected by avoiding placement under rugs or mats.
- What is the recommended action before replacing a fuse?
- Which of the following statements are true regarding general safety in the workshop? Statement 1: Use any available tool for the job, even if it is not the correct one. Statement 2: Keep the tools in their proper place after use. Statement 3: Clean the machine while it is still running. Statement 4: Replace worn-out or damaged tools immediately.
- What is the most effective way to avoid mechanical hazards when operating large and dangerous machines?
Important Questions from Occupational Safety and Health
Which of the following aspects is not a part of safe work place?
Which of the following cannot be used as a safety device?
The only thing that can keep you safe consistently is
Hoists and lifts used for carrying persons shall be fitted with
Which of the following is an effective way to prevent electrical accidents in the workplace?
