Two taps take 10 min and 15 min, respectively, to fill an empty pool. The first tap was ON for 4 min, after which it stopped working. How much time will the second tap take to fill the pool?
9 min
This problem involves calculating the time taken by two taps to fill a pool, working at different rates and for different durations. We are given the time each tap takes to fill the entire pool individually and the time the first tap worked before stopping. We need to find how long the second tap takes to fill the remaining part of the pool.
The rate of a tap is the fraction of the pool it can fill in one minute.
The first tap was ON for 4 minutes. To find the amount of work (fraction of the pool filled) done by Tap 1 in this time, we multiply its rate by the time it worked.
Work done by Tap 1 = Rate of Tap 1 \(\times\) Time
Work done by Tap 1 = \(\frac{1}{10} \times 4\)
Work done by Tap 1 = \(\frac{4}{10} = \frac{2}{5}\) of the pool.
So, in the first 4 minutes, Tap 1 filled \(\frac{2}{5}\) of the pool.
The total work required is to fill the entire pool, which can be represented as 1 (or \(\frac{5}{5}\)). After Tap 1 worked, a certain fraction of the pool is left empty.
Remaining fraction of pool = Total pool - Work done by Tap 1
Remaining fraction of pool = \(1 - \frac{2}{5}\)
To subtract, find a common denominator:
Remaining fraction of pool = \(\frac{5}{5} - \frac{2}{5} = \frac{5-2}{5} = \frac{3}{5}\) of the pool.
So, \(\frac{3}{5}\) of the pool still needs to be filled.
The remaining \(\frac{3}{5}\) of the pool will be filled by Tap 2, which has a rate of \(\frac{1}{15}\) of the pool per minute. To find the time taken, we divide the remaining work by the rate of Tap 2.
Time taken by Tap 2 = Remaining fraction of pool / Rate of Tap 2
Time taken by Tap 2 = \(\frac{3}{5} / \frac{1}{15}\)
Dividing by a fraction is the same as multiplying by its reciprocal:
Time taken by Tap 2 = \(\frac{3}{5} \times \frac{15}{1}\)
Time taken by Tap 2 = \(\frac{3 \times 15}{5 \times 1}\)
Time taken by Tap 2 = \(\frac{45}{5}\)
Time taken by Tap 2 = 9 minutes.
Therefore, the second tap will take 9 minutes to fill the remaining part of the pool.
| Tap | Time to fill (min) | Rate (Pool/min) |
|---|---|---|
| Tap 1 | 10 | \(\frac{1}{10}\) |
| Tap 2 | 15 | \(\frac{1}{15}\) |
| Concept | Explanation | Formula |
|---|---|---|
| Work Rate | The amount of work done per unit of time. | Rate = \(\frac{\text{Total Work}}{\text{Time Taken}}\) |
| Work Done | The total amount completed. | Work Done = Rate \(\times\) Time |
| Time Taken | Duration to complete a certain amount of work. | Time Taken = \(\frac{\text{Work Done}}{\text{Rate}}\) |
Problems involving taps filling pools or pipes emptying tanks are common examples of 'Time and Work' problems. The key idea is to think about the fraction of the work completed per unit of time. This is the 'rate' of the worker (or tap/pipe).
In this specific problem, since Tap 1 stopped working, we only needed to calculate the work it did and then find the time the second tap took for the remainder using its own rate.
15 pipes, each having the same diameter, can fill a cistern in 12 minutes. How long will it take for 6 pipes, each with double the original diameter, to fill the same cistern at the same speed of the flow?
Two pipes namely A and B can fill a tank in 25 minutes and half an hour respectively and a pipe C can empty 3 gallons per minute. All three pipes working together can fill the tank in 15 minutes. The capacity of the tank is:
Two pipes X and Y can individually fill a tank in 48 and 72 minutes respectively. If they are opened simultaneously, how long would it take for the tank to fill?
P, Q and R are channels which discharge solutions A, B, C respectively in a tank. When the tank is empty and all the three channels are opened what is the proportion of the solution C in the tank after 3 minutes, if the channels P, Q and R can fill the tank from empty to full in 30 minutes and 20 minutes and 10 minutes respectively when they are opened one at a time.
Two pipes A and B can fill an empty cistern in 32 and 48 hours, respectively. Pipe C can drain the entire cistern in 64 hours when no other pipe is in operation. Initially, when the cistern was empty Pipe A and Pipe C were turned on. After a few hours, Pipe A was turned off and Pipe B was turned on instantly. In all it took 112 hours to fill the cistern. For how many hours was Pipe B turned on?
A tanker can fill a cistern in 12 hours. After half the cistern is filled, 2 more similar tankers are opened. What is the time taken to fill the remaining half of the tank?
Pipes A, B and C are attached to an empty cistern. While the first two can fill the cistern in 4 and 10 hours, respectively, the third can drain the cistern, when filled, in 6 hours. If all the three pipes are opened simultaneously when the cistern is three-fifth full, how many hours will be needed to fill the cistern?
Pipe P can fill $\frac{2}{3}$ part of a tank in 16 hours, and pipe Q can fill $\frac{5}{6}$ part of the same tank in 20 hours. Both P and Q were kept open for 2 hours, then both were closed. Pipe R alone was then opened and it emptied the water in the tank in 8 hours. Pipes P, Q and R together can fill the empty tank in:
Pipe P can fill $\frac{2}{3}$ part of a tank in 24 hours, and pipe Q can fill $\frac{2}{3}$ part of the same tank in 16 hours. Both P and Q were kept open for 4 hours, then both were closed. Pipe R alone was then opened and it emptied the water in the tank in 5 hours. Pipes P, Q and R together can fill the empty tank in:
Pipe P can fill $\frac{3}{8}$ part of a tank in 21 hours and pipe Q can fill $\frac{2}{7}$ part of the same tank in 16 hours. Both P and Q were kept open for 2 hours, then both were closed. Pipe R alone was then opened and it emptied the water in the tank in 3 hours. Pipes P, Q and R together can fill the empty tank in: