Understanding Trickle Charging Purpose
Trickle charging involves applying a very low electric current to a storage battery. This low current continuously replenishes the charge lost due to the battery's natural self-discharge over time.
Primary Function of Trickle Charging
The main goal of trickle charging is to counteract self-discharge. By constantly supplying a small amount of energy, it ensures that the battery remains in a state of maximum charge, effectively helping it to attain and maintain a fully charged state.
- It prevents the battery voltage from dropping below optimal levels due to self-discharge during periods of inactivity.
- This ensures the battery is always ready for use and operates at its peak performance.
Addressing Other Options
While trickle charging can indirectly help prevent sulphation by keeping the battery plates clean and charged, its primary purpose isn't solely sulphation prevention. It also doesn't significantly increase reserve capacity or directly maintain the electrolyte level (which is more related to topping up with distilled water).
Therefore, the most accurate description of what trickle charging helps achieve, aligning with its function of counteracting self-discharge, is ensuring the battery remains fully charged.
Similar Questions
In a mercury cell, zinc-mercury amalgam is used as an anode and carbon is used as a cathode. A paste of _______ is used as an electrolyte.
Which one of the following is not a rechargeable dry cell?
- In which part of a cell does oxidation take place?
- An alkaline cell is discharged at a steady current of 4A for 12 hours. To restore it to its original state of charge, a steady current of 3A for 20 hours is required. Calculate Ah efficiency.
- The positive plates of nickel iron cell are made up of:
- What will be the backup time of a UPS if it is backed by 150Ah, 12V battery driving a load of 150 W?
- Which of the following material is used for negative pole of a dry cell?
- Dry cell E.M.F Value is approximately________.
- In general, battery capacity is written in ______.
- Four cells of emf 1.5 V each are connected in parallel combination of cells. Then the output voltage of the parallel combination is
Important Questions from Cells and Batteries
- To significantly increase the maximum continuous discharge current (C-rate) a lithium-ion battery pack can safely supply, while maintaining its nominal voltage, which of the following architectural design modifications is most effective?
Which of the following statement is correct for primary cell with regards to secondary cell?
Which of the following is not a primary cell?
In dry cells, free electrons are released at:
The most common used primary cell is :
