Parallel Cell Combination Output Voltage
When multiple cells with the same electromotive force (emf) are connected in parallel, the overall output voltage (or equivalent emf) remains the same as the emf of a single cell.
Given:
- Emf of each cell, \(\mathcal{E} = 1.5\) V
- Number of cells, \(n = 4\)
- Connection type: Parallel
For a parallel combination of identical cells, the equivalent emf (\(\mathcal{E}_{\text{eq}}\)) is calculated as:
\(\mathcal{E}_{\text{eq}} = \mathcal{E}\)Substituting the given value:
\(\mathcal{E}_{\text{eq}} = 1.5 \text{ V}\)Therefore, the output voltage of the parallel combination is 1.5 V.
Similar Questions
In a mercury cell, zinc-mercury amalgam is used as an anode and carbon is used as a cathode. A paste of _______ is used as an electrolyte.
Which one of the following is not a rechargeable dry cell?
- In which part of a cell does oxidation take place?
- Trickle charging of a storage battery helps to:
- An alkaline cell is discharged at a steady current of 4A for 12 hours. To restore it to its original state of charge, a steady current of 3A for 20 hours is required. Calculate Ah efficiency.
- The positive plates of nickel iron cell are made up of:
- What will be the backup time of a UPS if it is backed by 150Ah, 12V battery driving a load of 150 W?
- Which of the following material is used for negative pole of a dry cell?
- Dry cell E.M.F Value is approximately________.
- In general, battery capacity is written in ______.
Important Questions from Cells and Batteries
- To significantly increase the maximum continuous discharge current (C-rate) a lithium-ion battery pack can safely supply, while maintaining its nominal voltage, which of the following architectural design modifications is most effective?
Which of the following statement is correct for primary cell with regards to secondary cell?
Which of the following is not a primary cell?
In dry cells, free electrons are released at:
The most common used primary cell is :
