All Exams Test series for 1 year @ ₹349 only
Question

The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:

The correct answer is

2.60 × 10-3

Calculating Seepage Loss in Hydraulic Structures using Flow Nets

Understanding seepage loss is crucial in the design and analysis of hydraulic structures like dams, weirs, and sheet piles. A flow net is a graphical tool used to visualize and quantify the flow of water through porous media, such as soil, under steady-state conditions. It consists of two families of curves intersecting at right angles: flow lines and equipotential lines.

Flow Net Components and Seepage Calculation

A flow net provides key parameters required to calculate the seepage discharge or seepage loss. These parameters are:

  • Flow Lines ($N_f$): These lines represent the path that water particles follow through the soil. The spaces between adjacent flow lines are called flow channels. The number of flow channels is one less than the number of flow lines.
  • Equipotential Lines ($N_d$): These lines connect points of equal hydraulic head. The drop in head between two adjacent equipotential lines is constant for a properly drawn flow net. The number of equipotential drops is one less than the number of equipotential lines.

The seepage discharge per unit width ($q$) through the porous medium can be calculated using the following formula derived from Darcy's Law:

$q = k \cdot H \cdot \frac{N_f}{N_d}$

Where:

  • $k$ is the coefficient of permeability of the soil.
  • $H$ is the total head difference causing the flow across the entire flow net.
  • $N_f$ is the number of flow channels.
  • $N_d$ is the number of equipotential drops.

Applying the Flow Net Formula to the Problem

We are given the following information for the hydraulic structure:

  • Number of flow lines = 5
  • Number of equipotential lines = 9
  • Head causing flow ($H$) = 20 m
  • Coefficient of permeability ($k$) = $2.6 \times 10^{-6}$ cm/sec

Step 1: Determine the number of flow channels and equipotential drops.

The number of flow channels ($N_f$) is the number of flow lines minus one:

$N_f = \text{Number of flow lines} - 1 = 5 - 1 = 4$

The number of equipotential drops ($N_d$) is the number of equipotential lines minus one:

$N_d = \text{Number of equipotential lines} - 1 = 9 - 1 = 8$

Step 2: Ensure units are consistent.

The permeability ($k$) is given in cm/sec, but the head ($H$) is given in meters. We need to convert the head to centimeters:

$H = 20 \text{ m} = 20 \times 100 \text{ cm} = 2000 \text{ cm}$

Step 3: Calculate the seepage loss using the formula.

Now, substitute the values into the seepage discharge formula:

$q = k \cdot H \cdot \frac{N_f}{N_d}$

$q = (2.6 \times 10^{-6} \text{ cm/sec}) \times (2000 \text{ cm}) \times \frac{4}{8}$

$q = (2.6 \times 10^{-6}) \times 2000 \times 0.5$

$q = (2.6 \times 10^{-6}) \times 1000$

When multiplying by 1000, which is $10^3$, we add 3 to the exponent of 10:

$q = 2.6 \times 10^{-6+3}$

$q = 2.6 \times 10^{-3} \text{ cm}^2/\text{sec}$

The unit cm²/sec represents the seepage discharge per unit width (cm³/sec per cm width). This is the seepage loss per unit width.

Conclusion

The calculated seepage loss per unit width for the given hydraulic structure and flow net configuration is $2.6 \times 10^{-3}$ cm²/sec.

Was this answer helpful?

Important Questions from Seepage Analysis

  1. Due to the remolding of soil, a smear zone is formed around the sand drain during its  construction. Select the correct statement about the smear zone 
  2. A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.

  3. Phreatic line in earthen dams has _______.
  4. The critical hydraulic gradient observed for sand boiling condition is given by:

  5. The depth of the impounded water in a 72 m long earthen dam is 6.2 m, while the tail water is 2.2 m deep. The hydraulic conductivity of the isotropic and homogeneous soil-fill of the dam is $0.53 \, m \, day^{-1}$. Flow net method is used to estimate seepage wherein the number of flow channels is 6 and the number of potential drops is 21. The seepage rate through the dam in $m^3 \, day^{-1}$ is ________.
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App