The critical hydraulic gradient observed for sand boiling condition is given by:
Sand boiling, also known as quicksand condition, is a phenomenon that occurs in saturated non-cohesive soils like sand or silt when the upward seepage pressure becomes large enough to reduce the effective stress to zero. When the effective stress becomes zero, the soil loses its shear strength, and the grains are pushed apart by the upward flow of water, making the soil behave like a viscous fluid. This can cause significant problems in geotechnical engineering, particularly during excavation below the water table or near hydraulic structures.
The critical hydraulic gradient (\(i_c\)) is the specific hydraulic gradient at which the effective stress in the soil becomes zero, leading to the condition of sand boiling.
Consider a layer of saturated soil. The effective stress (\(\sigma'\)) at any point within the soil is given by the total stress (\(\sigma\)) minus the pore water pressure (\(u\)).
Under upward seepage flow, the pore water pressure increases. Sand boiling occurs when:
\(\sigma' = \sigma - u = 0\)
This means the upward pore water pressure equals the total stress.
The upward seepage force per unit volume of soil is equal to \(i \gamma_w\), where \(i\) is the hydraulic gradient and \(\gamma_w\) is the unit weight of water.
The submerged unit weight of the soil is \(\gamma_{sub}\). The condition for sand boiling is met when the upward seepage force equals the submerged weight of the soil column, which is \(\gamma_{sub}\) per unit volume.
Thus, at critical condition:
\(i_c \gamma_w = \gamma_{sub}\)
So, the critical hydraulic gradient is given by:
\(i_c = \dfrac{\gamma_{sub}}{\gamma_w}\)
The submerged unit weight \(\gamma_{sub}\) is related to the saturated unit weight \(\gamma_{sat}\) and the unit weight of water \(\gamma_w\) by \(\gamma_{sub} = \gamma_{sat} - \gamma_w\). The saturated unit weight \(\gamma_{sat}\) is related to the specific gravity of soil solids (\(G\)) and the void ratio (\(e\)) by the formula:
\(\gamma_{sat} = \dfrac{(G+e)}{1+e} \gamma_w\)
Substituting this into the equation for \(\gamma_{sub}\):
\(\gamma_{sub} = \dfrac{(G+e)}{1+e} \gamma_w - \gamma_w = \left(\dfrac{G+e}{1+e} - 1\right) \gamma_w = \left(\dfrac{G+e - (1+e)}{1+e}\right) \gamma_w = \left(\dfrac{G-1}{1+e}\right) \gamma_w\)
Now, substituting this expression for \(\gamma_{sub}\) back into the equation for \(i_c\):
\(i_c = \dfrac{\left(\dfrac{G-1}{1+e}\right) \gamma_w}{\gamma_w}\)
\(i_c = \dfrac{G-1}{1+e}\)
Where:
This formula gives the critical hydraulic gradient at which sand boiling is expected to occur for a given soil with specific gravity \(G\) and void ratio \(e\).
The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:
A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.