All Exams Test series for 1 year @ ₹349 only
Question

The depth of the impounded water in a 72 m long earthen dam is 6.2 m, while the tail water is 2.2 m deep. The hydraulic conductivity of the isotropic and homogeneous soil-fill of the dam is $0.53 \, m \, day^{-1}$. Flow net method is used to estimate seepage wherein the number of flow channels is 6 and the number of potential drops is 21. The seepage rate through the dam in $m^3 \, day^{-1}$ is ________.

Calculating Earthen Dam Seepage Rate

The seepage rate through an earthen dam is determined using the flow net method. This method analyzes the flow of water through porous soil by considering key parameters such as hydraulic conductivity, total head loss, number of flow channels, number of potential drops, and the dam's width.

Seepage Rate Formula Explained

The volumetric seepage rate ($Q$) is calculated using the formula:

$Q = K \times H \times \frac{N_f}{N_d} \times W$

Where:

  • $Q$ represents the seepage rate in cubic meters per day ($m^3 \, day^{-1}$).
  • $K$ is the hydraulic conductivity of the soil in meters per day ($m \, day^{-1}$).
  • $H$ is the total head difference across the dam in meters ($m$).
  • $N_f$ is the number of flow channels identified in the flow net.
  • $N_d$ is the number of potential drops (or equipotential steps) in the flow net.
  • $W$ is the width of the dam perpendicular to the cross-section, in meters ($m$).

Input Data Extraction

The problem provides the following values:

  • Dam Width ($W$, interpreted from "72 m long"): $72 \, m$
  • Upstream water depth ($h_u$): $6.2 \, m$
  • Tail water depth ($h_t$): $2.2 \, m$
  • Hydraulic conductivity ($K$): $0.53 \, m \, day^{-1}$
  • Number of flow channels ($N_f$): $6$
  • Number of potential drops ($N_d$): $21$

Calculation Steps

  1. Determine the Total Head Loss ($H$):

    $H$ is the difference between the upstream and downstream water levels.

    $H = h_u - h_t$

    $H = 6.2 \, m - 2.2 \, m = 4.0 \, m$

  2. Apply the Seepage Formula:

    Substitute all known values into the seepage rate equation.

    $Q = (0.53 \, m \, day^{-1}) \times (4.0 \, m) \times \frac{6}{21} \times (72 \, m)$

  3. Compute the Seepage Rate ($Q$):

    Perform the multiplication and division.

    $Q = 0.53 \times 4.0 \times \frac{6}{21} \times 72$

    $Q = 2.12 \times \frac{2}{7} \times 72$

    $Q = \frac{4.24}{7} \times 72$

    $Q \approx 0.605714 \times 72$

    $Q \approx 43.6114 \, m^3 \, day^{-1}$

The calculated seepage rate is approximately $43.61 \, m^3 \, day^{-1}$. This value falls within the range of 43.5 and 43.7.

Was this answer helpful?

Important Questions from Seepage Analysis

  1. The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:

  2. Due to the remolding of soil, a smear zone is formed around the sand drain during its  construction. Select the correct statement about the smear zone 
  3. A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.

  4. Phreatic line in earthen dams has _______.
  5. The critical hydraulic gradient observed for sand boiling condition is given by:

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App