All Exams Test series for 1 year @ ₹349 only
Question

Phreatic line in earthen dams has _______.

The correct answer is atmospheric pressure on it

Understanding the Phreatic Line in Earthen Dams

The phreatic line, also known as the seepage line or free surface, is a crucial concept in the study of fluid flow through porous media, particularly in the context of earthen dams. It represents the upper boundary of the saturated zone within the dam structure.

Below the phreatic line, the soil pores are completely filled with water, and the pore water pressure is positive. Above the phreatic line, the soil is unsaturated, and the pore water pressure is negative (capillary tension).

Pressure on the Phreatic Line

The phreatic line itself is defined as the line along which the pore water pressure is equal to the atmospheric pressure. We consider atmospheric pressure as the reference pressure, often taken as zero for convenience in engineering calculations.

Therefore, at every point lying exactly on the phreatic line within an earthen dam, the pressure is essentially the same as the pressure of the atmosphere surrounding the dam. This boundary condition helps engineers determine the shape and position of the phreatic line during seepage analysis.

  • The phreatic line marks the transition from positive pore water pressure below it to negative pore water pressure (or zero/atmospheric pressure) above it.
  • Along the phreatic line itself, the gauge pressure is zero, which corresponds to atmospheric pressure.

Importance of the Phreatic Line in Earthen Dams

The location and shape of the phreatic line are vital for the stability and safety of an earthen dam. A high phreatic line can lead to:

  • Increased pore water pressure, reducing the effective stress and shear strength of the dam material.
  • Exit gradient problems at the downstream toe, potentially causing piping or erosion.

Proper design, including filters and drainage layers, is essential to control the phreatic line and keep it low, especially near the downstream face.

Was this answer helpful?

Important Questions from Seepage Analysis

  1. The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:

  2. Due to the remolding of soil, a smear zone is formed around the sand drain during its  construction. Select the correct statement about the smear zone 
  3. A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.

  4. The critical hydraulic gradient observed for sand boiling condition is given by:

  5. The depth of the impounded water in a 72 m long earthen dam is 6.2 m, while the tail water is 2.2 m deep. The hydraulic conductivity of the isotropic and homogeneous soil-fill of the dam is $0.53 \, m \, day^{-1}$. Flow net method is used to estimate seepage wherein the number of flow channels is 6 and the number of potential drops is 21. The seepage rate through the dam in $m^3 \, day^{-1}$ is ________.
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App