All Exams Test series for 1 year @ ₹349 only
Question

Due to the remolding of soil, a smear zone is formed around the sand drain during its  construction. Select the correct statement about the smear zone 

The correct answer is

The radial distance from the center line of drain well to the farthest point on the smear zone is equal to the radius of smear zone.

When vertical sand drains are installed in soft clay or silty soils, the process of driving or vibrating the drain through the soil causes significant disturbance to the surrounding soil. This disturbance, known as remolding of soil, leads to the formation of a disturbed zone around the drain called the smear zone. Understanding the characteristics of this smear zone is crucial for accurately predicting the performance of sand drains in accelerating consolidation.

Smear Zone Formation and Properties

The smear zone is an annular region of soil immediately surrounding the sand drain. The soil within this zone undergoes significant structural changes due to the installation process. Key properties affected include:

  • Remolding of Soil: The soil structure is disturbed and reoriented, often resulting in a reduction in void ratio and a denser state, or sometimes just a complete disruption of the natural fabric.
  • Permeability Reduction: A critical effect of remolding of soil in the smear zone is the reduction in the coefficient of permeability. This reduction occurs because the continuous drainage paths within the natural soil structure are disrupted, making it harder for water to flow through the remolded clay. This impacts both radial and vertical permeability.
  • Excess Pore Pressure Dissipation: The presence of the smear zone affects the rate at which excess pore pressure dissipates from the soil into the sand drain.

Analyzing Statements about the Smear Zone

Let's evaluate each statement concerning the smear zone formed around a sand drain during its construction:

Statement 1: Excess Pore Pressure on Outer Boundary

The statement claims that "The clay in the smear zone has zero excess pore pressure on the outer boundary."

  • In consolidation theory, excess pore pressure dissipates over time as water drains out. The outer boundary of the *entire drainage zone* (influenced by the drain) is where initial excess pore pressure exists and where it gradually reduces. For the smear zone specifically, its outer boundary is within the larger soil mass that is consolidating. It is not generally true that the excess pore pressure is zero at the outer boundary of the smear zone throughout the consolidation process. It would typically be non-zero and time-dependent, decreasing as consolidation proceeds, but only reaching zero after full consolidation. Therefore, this statement is not accurate.

Statement 2: Radial Distance and Radius of Smear Zone

The statement claims that "The radial distance from the center line of drain well to the farthest point on the smear zone is equal to the radius of smear zone."

  • This statement is a fundamental definition of the radius of the smear zone. The smear zone is defined as the disturbed region extending outwards from the sand drain. The radial distance from the center of the drain to the outermost edge of this disturbed zone is by definition its radius. This is a standard concept in geotechnical engineering related to sand drains and the smear zone. This statement is correct.

Statement 3: Permeability Increase due to Remoulding

The statement claims that "An increase in coefficient of permeability in the radial direction occurs due to remoulding."

  • As explained earlier, the remolding of soil in the smear zone typically disrupts the natural soil structure. This disruption generally leads to a *decrease* in the coefficient of permeability, not an increase. The disturbed clay becomes less permeable, which hinders the radial flow of water towards the sand drain. Therefore, this statement is not accurate.

Statement 4: Time Dependent Excess Pore Pressure on Inner Boundary

The statement claims that "The clay in the smear zone has time dependent excess pore pressure on the inner boundary."

  • The inner boundary of the smear zone is the interface with the sand drain itself. For an ideal sand drain, it is often assumed that the excess pore pressure at the drain surface (which is the inner boundary of the smear zone) is maintained at zero because the drain acts as a perfect conduit for water. While in reality, there might be some minor pressure gradient or drainage resistance, the primary assumption for ideal drains is zero excess pore pressure at this boundary for effective drainage. Stating it is "time-dependent" on the inner boundary could be misleading as it implies non-zero and varying pressure, contrary to the ideal drain assumption. The time-dependence is more characteristic of the excess pore pressure *within* the soil mass rather than *at* the ideal drain boundary. Therefore, this statement is less precise and potentially inaccurate under common assumptions.

Conclusion on Smear Zone Statement

Based on the analysis, the most accurate statement describing the smear zone is its definition regarding its radius.

The correct statement is that the radial distance from the center line of the drain well to the farthest point on the smear zone is equal to the radius of the smear zone.

Was this answer helpful?

Important Questions from Seepage Analysis

  1. The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:

  2. A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.

  3. Phreatic line in earthen dams has _______.
  4. The critical hydraulic gradient observed for sand boiling condition is given by:

  5. The depth of the impounded water in a 72 m long earthen dam is 6.2 m, while the tail water is 2.2 m deep. The hydraulic conductivity of the isotropic and homogeneous soil-fill of the dam is $0.53 \, m \, day^{-1}$. Flow net method is used to estimate seepage wherein the number of flow channels is 6 and the number of potential drops is 21. The seepage rate through the dam in $m^3 \, day^{-1}$ is ________.
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App