Which combination of factors is most likely to result in cracks due to shrinkage in plaster?
Application of thick coat and rapid drying
Shrinkage cracks in plaster result from:
- Thick coat: More mortar volume undergoes greater volumetric shrinkage during drying
- Rapid drying: If water evaporates too quickly (hot/dry weather, direct sun, strong wind), the surface dries and shrinks before the inner layers, causing differential shrinkage and cracking
Thin coats shrink less in absolute terms. Slow drying (moist conditions, curing) allows gradual uniform shrinkage without cracking. The combination of thick coat + rapid drying creates the maximum risk of shrinkage cracks.
Similar Questions
Which of the following is NOT a type of clay tile for roofing?
A louvered door is ideal for which type of location within a building?
A door designed with inclined slats to permit ventilation while restricting direct visibility is classified as which type?
Which of the following flooring is most suitable for a luxurious appearance in a high- end hotel lobby?
The minimum slope for an accessible ramp as per most building codes is ______.
Which of the following types of flooring is preferably used in dancing halls and in auditoriums?
Which roof type is most suitable for covering spans greater than 9 m?
Important Questions from Building Component
In the method used to establish the magnitude of live load, what is the reference time period?
Live loads, with time can vary in: -
Gradually applied static loads do not change with time their
An artificial marine structure used for berthing of ships and vessels for sheltering, repairing and designing is called as:
______ are lightweight, structurally efficient composites, however the timber outer surface needs a protective coating that must be maintained.
