PNP Transistor Base Material Identification
A PNP transistor consists of three semiconductor layers. The structure is defined by the types of materials used for the Emitter, Base, and Collector regions.
- P in PNP refers to the P-type semiconductor material used for the Emitter.
- N in PNP refers to the N-type semiconductor material used for the Base.
- The final P refers to the P-type semiconductor material used for the Collector.
Therefore, the base layer in a PNP transistor is made of N-type semiconductor material.
The correct option is N.
Similar Questions
Additional heat is dissipated from power transistor by using
NPN Transistor proper biasing for conduction is
The primary difference between a FET and a BJT is that _______.
A transistor connector in CE configuration has a V CC of +12 V and R C= 1 kΩ. Identify the coordinates of the load line from the given options.
- The regenerative process where the collector junction temperature increases the collector current and vice versa is called _____.
In a transistor, identify the terminal with the highest doping from the options given below.
- For normal operation of NPN transistor:
In which of the following transistor configuration is the amplifier voltage gain the lowest?
Important Questions from Bipolar Junction Transistors
The __________ area in the transistor is considerably smaller than the collector area.
For a common emitter connection of BJT, find the value of β if α = 0.995
- Which represents the Transport Factor of BJT?
Secondary Breakdown occurs in -
For a bipolar junction transistor in common emitter mode, IC = maximum and VC (collector voltage) = VE (emitter voltage), the transistor operates in _____ mode.
