In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ________.
5 bytes
In packet switching a message is split into packets, and each packet carries its share of the data plus its own header, so packet size = data per packet + header size.
Step 1 — Data carried by each packet: \(\dfrac{48 \text{ bytes}}{24} = 2 \text{ bytes}\).
Step 2 — Add the header: \(2 + 3 = 5 \text{ bytes}\).
Step 3 — Check: 24 packets × 5 bytes = 120 bytes on the wire, of which 72 bytes are headers and 48 bytes are the message.
2 bytes is only the data part and ignores the header; 1 byte and 4 bytes match neither the payload nor payload plus header, and a 1-byte or 4-byte packet cannot even hold the 3-byte header together with 2 bytes of data.
5 bytes option is correct.
Which protocol is used to acquire the MAC Address of a host whose IP address is known?
Choose the correct statements from the following
A. In connection oriented service, the destination address is to be specified only during the setup.
B. Packet sequencing is not guaranteed in connection oriented service
C. Flooding is method in which every incoming packet is sent out on every outgoing line except the one by which it arrived.
D. Presentation layer performs detection and recovery from errors in the transmitted data.
Choose the correct answer from the options given below:
Consider the following statements about routing in computer networks.
S1: Routers operate at the network layer
S2: Routing determines packet forwarding paths
S3: Static routing updates automatically S4: Dynamic routing protocols exchange routing information.
Which of the given statements are TRUE?
Computer in a network cannot be accessed outside of the local network unless given permission is known as:
In OSI model network layer is responsible for _______.
The full form of ICANN is