In a logic circuit, three SPST (Single Pole Single Throw) switches are used to implement a logic gate. The switches are connected in series. What is the output of the circuit if all switches are closed?
1
In a digital logic circuit, SPST (Single Pole Single Throw) switches can be used to represent basic logic operations. When switches are connected in series, they function as an AND gate. This is because the current can only flow through all switches if every switch is closed (i.e., all input conditions are true or 1). Therefore, the logic operation performed by this configuration is:
Output = A AND B AND C
Explanation:
- When a switch is closed, it represents a logic state of 1 (True).
- For a series configuration of switches (AND logic), the output will only be 1 if all switches are closed.
- If any switch is open, the circuit is broken, and the output will be 0.
In this specific scenario:
- All switches are closed.
- Therefore, all inputs are 1.
- The AND operation with inputs 1, 1, and 1 results in an output of 1.
Thus, the output of the circuit is 1.
Similar Questions
In a logic circuit, two inputs A and B are applied to an AND gate, and the output of the AND gate is connected to the input of a NOT gate. If the inputs A and B are both at logic 0, what will be the output of the entire circuit?
_______ are universal logic gates.
- _____ is the digital 2-input logic gate whose output is HIGH only when both its inputs are the same.
- A three Input NOR gate gives high O/P when _____.
- The Output of NAND Gate is low in case ________
Important Questions from Logic Gates
Which logical gate is included in a binary adder circuit to enable binary addition and subtraction?
A Circuit that operates in such a way that its output is high only when all its inputs are high
______ is also known as Inverter.
The minimum number of NAND gates required to reduce the expression ((A + B)C) D is:
In which of the following gates, the output is high if and only if all inputs are high?
