All Exams Test series for 1 year @ ₹349 only
Question

Calculate the value of minimum edge distance for 20 mm diameter bolt using machine flame cut.

The correct answer is

33 mm

Bolt Edge Distance Calculation for Structural Connections

When designing structural steel connections, ensuring adequate edge distance for bolts is crucial for the safety and performance of the structure. The minimum edge distance prevents tearing of the plate material and ensures proper load transfer around the bolt hole. This calculation adheres to the guidelines specified in IS 800:2007, which is the Indian Standard for general construction in steel.

Understanding Minimum Edge Distance

The minimum edge distance is defined as the distance from the center of any bolt hole to the nearest edge of a plate or rolled section. This distance is critical for ensuring the structural integrity of a bolted joint. The required minimum edge distance varies depending on factors such as the bolt diameter and the method used to cut or prepare the edge of the steel member.

Machine Flame Cut Edge Requirements

The question specifies a machine flame cut edge. According to IS 800:2007, Clause 10.2.4.2 and Table 8, different types of edge preparations have distinct minimum edge distance requirements:

  • For sheared or hand flame cut edges: The minimum edge distance should be at least \(1.7\) times the nominal hole diameter (\(d_0\)).
  • For rolled, machine flame cut, sawn, and planed edges: The minimum edge distance should be at least \(1.5\) times the nominal hole diameter (\(d_0\)).

Since the edge in question is a "machine flame cut" edge, we will use the factor of \(1.5 \times d_0\) for our calculation.

Calculating for 20 mm Diameter Bolt

To calculate the minimum edge distance for a 20 mm diameter bolt, we first need to determine the nominal hole diameter (\(d_0\)).

  • For bolts with a diameter up to 24 mm, the standard clearance for the bolt hole is 2 mm.
  • Therefore, for a 20 mm diameter bolt, the nominal hole diameter \(d_0\) is calculated as: \[d_0 = \text{Bolt Diameter} + \text{Clearance}\] \[d_0 = 20 \text{ mm} + 2 \text{ mm}\] \[d_0 = 22 \text{ mm}\]

Now, we apply the appropriate factor for a machine flame cut edge:

  • Minimum Edge Distance = \(1.5 \times d_0\)
  • Minimum Edge Distance = \(1.5 \times 22 \text{ mm}\)
  • Minimum Edge Distance = \(33 \text{ mm}\)

This calculated value of 33 mm is the minimum required edge distance for a 20 mm diameter bolt in a structural steel member with a machine flame cut edge, in accordance with the provisions of IS 800:2007. Adhering to this minimum distance is essential for the safe and effective performance of the bolted connection in a steel structure.

Was this answer helpful?

Important Questions from Riveted Connections

  1. According to IS-800, for rivets of diameter ‘d’ ,minimum rivet pitch will be -  

  2. Rivet value is defined as -

  3. According to IS-800, gross diameter of rivets of nominal diameter up to 25 mm is-

  4. Calculate the minimum spacing of 20 mm diameter bolt as per IS 800-2007.

  5. Design of a riveted joint, is based on the assumption
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App