All Exams Test series for 1 year @ ₹349 only
Question

According to IS-800, for rivets of diameter ‘d’ ,minimum rivet pitch will be -  

The correct answer is

2.5d

Understanding Minimum Rivet Pitch per IS-800

Rivet pitch is the distance between the centers of two adjacent rivets measured along a single gauge line in a structural steel connection. Proper spacing of rivets is crucial for ensuring the strength and integrity of the connection. The minimum pitch requirement is set by standards like IS-800 to prevent issues such as bursting of plates or shearing of rivets due to inadequate material between them. According to the Indian Standard code IS-800 (specifically IS 800:2007, the standard for general construction in steel), there are specific requirements for the minimum pitch for rivets or bolts used in steel structures. For rivets of diameter ‘d’, the IS-800 code specifies the minimum pitch. This minimum pitch is primarily determined by the diameter of the rivet. The minimum pitch for rivets (or bolts) in steel structures, as per IS-800, is specified as:
  • Minimum pitch along the gauge line for rivets or bolts in tension or compression = \(2.5 \times \text{nominal diameter}\)
In this question, the diameter of the rivet is given as ‘d’. Therefore, the minimum rivet pitch according to IS-800 is \(2.5 \times d\). Let's look at the given options:
  • Option 1: \(1.5d\)
  • Option 2: \(3d\)
  • Option 3: \(2.5d\)
  • Option 4: \(2d\)
Comparing the standard requirement from IS-800 with the options, we find that the minimum rivet pitch is \(2.5d\). This minimum pitch requirement ensures that there is sufficient material between rivet holes to prevent failure modes related to close spacing.
Was this answer helpful?

Important Questions from Riveted Connections

  1. Rivet value is defined as -

  2. According to IS-800, gross diameter of rivets of nominal diameter up to 25 mm is-

  3. Calculate the minimum spacing of 20 mm diameter bolt as per IS 800-2007.

  4. Calculate the value of minimum edge distance for 20 mm diameter bolt using machine flame cut.

  5. Design of a riveted joint, is based on the assumption
Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App