According to IS-800, gross diameter of rivets of nominal diameter up to 25 mm is-
Nominal diameter + 1.5 mm
When working with steel structures, rivets are often used to connect different members. The dimensions of these rivets and the holes they go into are specified by standards like IS-800 (Indian Standard for General Construction in Steel - Code of Practice).
There are two main terms related to rivet diameter: nominal diameter and gross diameter.
According to IS-800, the size of the rivet hole, which determines the gross diameter of the rivet, depends on the nominal diameter of the rivet.
For rivets with a nominal diameter up to and including 25 mm, the diameter of the rivet hole is kept larger than the nominal diameter by 1.5 mm. This extra clearance ensures the rivet can be inserted easily before being hammered to fill the hole.
Therefore, for nominal diameter \(d \le 25 \text{ mm}\), the gross diameter \(D\) is given by the formula:
\(D = d + 1.5 \text{ mm}\)
For rivets with a nominal diameter greater than 25 mm, the hole diameter is typically made larger by 2 mm.
Based on the IS-800 provisions for nominal diameters up to 25 mm, the gross diameter is obtained by adding 1.5 mm to the nominal diameter.
According to IS-800, for rivets of diameter ‘d’ ,minimum rivet pitch will be -
Rivet value is defined as -
Calculate the minimum spacing of 20 mm diameter bolt as per IS 800-2007.
Calculate the value of minimum edge distance for 20 mm diameter bolt using machine flame cut.