A vehicle is moving on a two-lane highway with design speed of 65 kmph on a horizontal curve of radius 250 m. What is the required length of transition curve based on rate of change of centrifugal acceleration?
41.4 m
A transition curve is an essential part of highway design, connecting a straight section of road to a circular curve. Its main purpose is to provide a gradual change in curvature and superelevation. This gradual change helps drivers comfortably enter and leave the curve by smoothly introducing the required centrifugal force.
One of the key factors determining the length of a transition curve is the rate at which centrifugal acceleration is introduced or removed. This rate needs to be limited to prevent discomfort to passengers and ensure stable vehicle movement.
The required length of the transition curve ($L_s$) based on the rate of change of centrifugal acceleration ($C$) is given by the formula:
$$L_s = \frac{V^3}{C \cdot R}$$
Where:
The value of $C$ represents how quickly the lateral acceleration builds up. According to Indian Road Congress (IRC) recommendations, the maximum permissible value of $C$ can be calculated using the formula:
$$C = \frac{80}{75 + V_{kmph}}$$
Where $V_{kmph}$ is the design speed in kilometers per hour.
Given:
Step 1: Convert design speed from kmph to m/s.
$$V_{m/s} = 65 \times \frac{1000}{3600} = 65 \times \frac{5}{18} \text{ m/s}$$
$$V_{m/s} = \frac{325}{18} \approx 18.056 \text{ m/s}$$
Step 2: Calculate the rate of change of centrifugal acceleration, C.
Using the formula $C = \frac{80}{75 + V_{kmph}}$:
$$C = \frac{80}{75 + 65} = \frac{80}{140} = \frac{4}{7} \text{ m/s}^3$$
$$C \approx 0.5714 \text{ m/s}^3$$
Step 3: Calculate the length of the transition curve, $L_s$.
Using the formula $L_s = \frac{V^3}{C \cdot R}$:
$$L_s = \frac{(18.056)^3}{(4/7) \times 250}$$
$$L_s = \frac{5891.57}{0.5714 \times 250}$$
$$L_s = \frac{5891.57}{142.85}$$
$$L_s \approx 41.24 \text{ m}$$
The calculated length of the transition curve is approximately 41.24 meters.
Let's compare the calculated length with the given options:
The calculated value of 41.24 m is closest to 41.4 m.
Therefore, the required length of the transition curve based on the rate of change of centrifugal acceleration is approximately 41.4 m.
The recommended camber value for thin bituminous surface for heavy rainfall area is:
For non-passing sight distance, the height of stationary object considered is
Total reaction time for normal driver to calculate stopping sight distance, as per IRC, is -
A two-lane State Highway with a bituminous concrete surface is to be constructed. What should be the height of the crown with respect to the edges, assuming straight-line camber? Assume heavy rainfall.
Cross slope given to the pavement for safe drainage of water is: