A two-lane State Highway with a bituminous concrete surface is to be constructed. What should be the height of the crown with respect to the edges, assuming straight-line camber? Assume heavy rainfall.
0.07 m
In highway engineering, providing camber (or cross-slope) is essential for efficient drainage of rainwater from the road surface. This prevents water accumulation, which can lead to pavement damage and reduced road safety. The specific rate of camber required depends on the type of road surface material and the amount of rainfall in the region.
The question specifies a "bituminous concrete surface" and "heavy rainfall." Bituminous concrete is classified as a high-type flexible pavement surface. The Indian Road Congress (IRC) provides standard recommendations for camber rates based on these conditions.
Specifically, for high-type bituminous surfaces, which include bituminous concrete, the IRC recommends:
Since the problem states "heavy rainfall," we will use a camber rate of 1 in 50.
\[\text{Camber rate (n)} = \frac{1}{50} = 0.02\]
The problem mentions a "two-lane State Highway." According to standard highway design practices and IRC guidelines, a typical width for a two-lane road is 7.0 meters.
For calculating the height of the crown, we consider the slope from the center (crown) to the edge. Therefore, we need to use half of the total roadway width.
\[\text{Half roadway width} = \frac{\text{Total width}}{2} = \frac{7.0 \text{ m}}{2} = 3.5 \text{ m}\]
The question assumes a straight-line camber. The height of the crown (h) with respect to the edges can be calculated by multiplying the half roadway width by the camber rate.
\[\text{Height of Crown (h)} = \text{Half roadway width} \times \text{Camber rate (n)}\]
Now, we substitute the values we have determined:
\[\text{h} = 3.5 \text{ m} \times 0.02\]
\[\text{h} = 0.07 \text{ m}\]
Therefore, for a two-lane State Highway with a bituminous concrete surface in an area experiencing heavy rainfall, the recommended height of the crown with respect to the edges is 0.07 meters.
| Type of Road Surface | Camber (Heavy Rainfall) | Camber (Light Rainfall) |
|---|---|---|
| Cement Concrete / High-type Bituminous (e.g., Bituminous Concrete) | 1 in 50 (2.0%) | 1 in 60 (1.67%) |
| Thin Bituminous Surface | 1 in 40 (2.5%) | 1 in 50 (2.0%) |
| Water Bound Macadam (WBM) / Gravel Roads | 1 in 33 (3.0%) | 1 in 40 (2.5%) |
| Earthen Roads | 1 in 25 (4.0%) | 1 in 33 (3.0%) |
Based on the standard practices for highway engineering, the calculated crown height of 0.07 m ensures proper drainage for the specified road conditions.
The recommended camber value for thin bituminous surface for heavy rainfall area is:
For non-passing sight distance, the height of stationary object considered is
Total reaction time for normal driver to calculate stopping sight distance, as per IRC, is -
Cross slope given to the pavement for safe drainage of water is:
All the specifications for highway planning and design are given by: