All Exams Test series for 1 year @ ₹349 only
Question

Cross slope given to the pavement for safe drainage of water is:     

The correct answer is

Camber

Understanding Pavement Cross Slope for Drainage

The question asks about the term used for the cross slope provided to a pavement. This cross slope is specifically designed for the safe drainage of water from the road surface. Proper drainage is crucial to prevent water accumulation, which can damage the pavement structure, reduce skid resistance, and pose a safety hazard to vehicles.

Let's look at the options provided and understand what each term means in the context of road engineering:

  • Camber: Camber, also known as cross fall, is the transverse slope given to the pavement surface from the centre line towards the edges. Its primary purpose is to drain rainwater quickly from the road surface, preventing it from infiltrating the pavement layers or accumulating on the surface. This helps maintain the pavement's integrity and improves visibility and safety during wet weather.
  • Kerb: A kerb (or curb) is the vertical or sloping boundary element between the road pavement and the adjacent area, such as a footpath, shoulder, or median. Kerbs help to channel water along the road edge, prevent vehicles from leaving the pavement unexpectedly, and delineate the edge of the roadway. While they manage water flow, they are not the cross slope of the pavement surface itself.
  • Cant: Cant is another term for superelevation. Superelevation is the banking of a road on a curve, where the outer edge of the pavement is raised relative to the inner edge. This slope is provided to counteract the centrifugal force experienced by vehicles negotiating a curve, allowing them to travel at higher speeds safely. It is a longitudinal design feature for curves, not a general cross slope for draining water from a straight pavement.
  • Shoulder: The shoulder is the portion of the roadway contiguous with the travel way (pavement) and outside the pavement edge. Shoulders provide an area for emergency stops, support the pavement edges, and can also contribute to drainage by carrying water away from the pavement edge, but they are separate from the pavement's primary cross slope.

Based on the definitions, the term specifically referring to the cross slope given to the pavement for safe drainage of water is Camber.

Comparison of Road Features
Feature Description Primary Purpose
Camber (Cross Slope) Transverse slope of the pavement surface (centre to edge). Safe drainage of water from the pavement surface.
Kerb Boundary element at the pavement edge. Channel water, delineate edge, vehicle restraint.
Cant (Superelevation) Banking of pavement on a curve (outer edge raised). Counteract centrifugal force on curves.
Shoulder Area adjacent to pavement edge. Emergency stops, pavement edge support, secondary drainage.

Revision Table: Key Pavement Drainage Terms

Here is a quick summary to help revise the concepts related to pavement drainage and design:

  • Camber: Essential for shedding water off the road surface. It's the transverse slope.
  • Kerb: Manages water flow at the edge and defines the pavement boundary.
  • Cant: Related to curve design and vehicle stability, not general straight drainage.
  • Shoulder: Provides support and emergency space, aids edge drainage.

Additional Information on Pavement Drainage and Camber

The amount of camber needed depends on factors like the type of pavement surface and the amount of rainfall in the region. Impermeable surfaces like concrete and asphalt need less camber than permeable surfaces like gravel. Higher rainfall areas require steeper cambers for effective drainage.

Common shapes of camber include:

  • Straight line camber: Simple to construct but less effective near the centre.
  • Parabolic camber: Provides a more uniform slope, effective drainage across the width.
  • Combination of straight and parabolic: Often used for wider pavements.

Maintaining the correct cross slope (camber) is a critical aspect of road maintenance to ensure long-term pavement performance and road safety.

Was this answer helpful?

Important Questions from Highway Geometric Design

  1. The recommended camber value for thin bituminous surface for heavy rainfall area is:

  2. For non-passing sight distance, the height of stationary object considered is

  3. Total reaction time for normal driver to calculate stopping sight distance, as per IRC, is -

  4. A two-lane State Highway with a bituminous concrete surface is to be constructed. What should be the height of the crown with respect to the edges, assuming straight-line camber? Assume heavy rainfall.

  5. All the specifications for highway planning and design are given by:

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App