Total reaction time for normal driver to calculate stopping sight distance, as per IRC, is -
2.5 seconds
In highway design, understanding the concept of reaction time is crucial, especially when calculating the stopping sight distance (SSD). The stopping sight distance is the minimum distance required for a vehicle travelling at a given speed to stop completely before hitting an obstruction. This distance depends on two main factors:
The Indian Road Congress (IRC) provides specific guidelines and standards for various aspects of highway design in India. For a normal driver, the total reaction time adopted by the IRC for calculating stopping sight distance is a standard value.
The reaction time of a driver is the time taken from the moment an obstacle is seen to the moment the brakes are effectively applied. This time is often broken down into several components, collectively known as the PIEV theory:
Considering these factors and ensuring a safe design, the IRC specifies a standard reaction time for a normal driver.
The formula for stopping sight distance (SSD) generally involves the reaction time:
\[ \text{SSD} = \text{Lag Distance} + \text{Braking Distance} \]
Where:
\[ \text{Lag Distance} = V \times T \]
Here, \(V\) is the design speed of the vehicle and \(T\) is the total reaction time of the driver.
For the purpose of designing roads and ensuring safety, the Indian Road Congress (IRC) has standardized the total reaction time for a normal driver to be 2.5 seconds. This value is used in various design calculations to determine adequate stopping sight distance on highways.
Based on the guidelines established by the Indian Road Congress (IRC), the assumed total reaction time for a normal driver when calculating stopping sight distance is:
| Parameter | Value (As per IRC) |
|---|---|
| Total Reaction Time for Normal Driver | 2.5 seconds |
This standard value helps ensure consistency and safety in highway design across India.
The recommended camber value for thin bituminous surface for heavy rainfall area is:
For non-passing sight distance, the height of stationary object considered is
A two-lane State Highway with a bituminous concrete surface is to be constructed. What should be the height of the crown with respect to the edges, assuming straight-line camber? Assume heavy rainfall.
Cross slope given to the pavement for safe drainage of water is:
All the specifications for highway planning and design are given by: