For non-passing sight distance, the height of stationary object considered is
15 cm
Non-passing sight distance, also commonly known as Stopping Sight Distance (SSD), is a fundamental concept in highway design. It represents the minimum distance required for a driver traveling at a given speed to bring a vehicle to a complete stop before colliding with a stationary object or obstruction on the roadway.
This distance is crucial for safety as it ensures drivers have enough time to react to unexpected situations and stop safely. The calculation of non-passing sight distance involves two main components:
An important factor in determining the visibility part of the non-passing sight distance is the height of the driver's eye above the road surface and the height of the stationary object on the road. These heights define the line of sight that must be clear over the non-passing sight distance.
Standard highway design guidelines specify certain heights for these elements to ensure consistency and safety. The standard height for the driver's eye is typically taken as 1.2 meters (120 cm) above the road surface.
For the stationary object, the height considered represents a small but significant obstruction that a driver must be able to see and react to. Common examples could be a fallen rock, a large pothole, or debris.
According to standard specifications for calculating non-passing sight distance, the height of the stationary object considered on the road surface is:
This height of 15 cm is chosen because it represents a relatively small object that could still cause significant damage or a hazard if hit, and drivers need to be able to see it from a sufficient distance to stop.
The question asks for the height of the stationary object considered for non-passing sight distance. Let's look at the given options:
| Option | Height |
|---|---|
| 1 | 10 cm |
| 2 | 65 cm |
| 3 | 50 cm |
| 4 | 15 cm |
Comparing these options to the standard height of a stationary object used in non-passing sight distance calculations, we find that 15 cm is the value specified by design standards.
The height of 65 cm and 50 cm are often associated with the height of an object for passing sight distance calculations (representing the top of an opposing vehicle), not the small stationary object for non-passing sight distance.
The height of 10 cm is close but not the standard value used for this specific calculation.
Therefore, the correct height of the stationary object considered for non-passing sight distance is 15 cm.
| Concept | Element | Standard Height |
|---|---|---|
| Non-Passing Sight Distance (SSD) | Driver's Eye Height | 1.2 meters (120 cm) |
| Height of Stationary Object | 0.15 meters (15 cm) | |
| Passing Sight Distance (PSD) | Driver's Eye Height | 1.2 meters (120 cm) |
| Height of Object (Opposing Vehicle) | 1.2 meters (120 cm) (Sometimes 1.3 m or 1.4 m depending on design standards/year, but 1.2m is common) |
Sight distance is a critical geometric design parameter for highways. It dictates the minimum length of visibility required on the road to ensure safe operations.
Adequate sight distance must be provided on both horizontal curves and vertical curves (summits and sags) to prevent obstructions from blocking the driver's view of the road ahead. Obstructions could be physical barriers like bridge piers, cut slopes, or even the profile of the road itself (in vertical curves).
The recommended camber value for thin bituminous surface for heavy rainfall area is:
Total reaction time for normal driver to calculate stopping sight distance, as per IRC, is -
A two-lane State Highway with a bituminous concrete surface is to be constructed. What should be the height of the crown with respect to the edges, assuming straight-line camber? Assume heavy rainfall.
Cross slope given to the pavement for safe drainage of water is:
All the specifications for highway planning and design are given by: