All Exams Test series for 1 year @ ₹349 only
Question

A uniform rope of length 4 m and mass 0.4 kg is held on a frictionless table in such a way that 0.6 m of the rope is hanging over the edge. The work done to pull the hanging part of the rope on to the table is, (Assume g = 10 m/s2)

The correct answer is

0.18 J

Pulling the rope slowly onto a frictionless table only raises the hanging part; the work done equals the gain in its gravitational potential energy, which is the weight of the hanging part times the rise of its centre of mass.

Step 1 — Mass per unit length: \(\lambda = \dfrac{0.4}{4} = 0.1\ \text{kg m}^{-1}\). Mass hanging: \(m_h = 0.1 \times 0.6 = 0.06\ \text{kg}\).

Step 2 — The centre of mass of the hanging part is at its middle, \(\dfrac{0.6}{2} = 0.3\ \text{m}\) below the table top.

Step 3 — \(W = m_h g\,h = 0.06 \times 10 \times 0.3 = 0.18\ \text{J}\).

0.36 J treats the whole hanging part as if it were raised through its full length 0.6 m, while 0.24 J and 0.12 J do not correspond to the rise of the centre of mass of the hanging mass.

0.18 J option is correct.

Was this answer helpful?

Similar Questions

  1. A train is moving along the tracks at a constant speed u. A girl on the train throws a ball of mass m straight ahead along the direction of motion of the train with speed v with respect to herself. Then

  2. An earth’s satellite near the surface of the earth takes about 90 min per revolution. A satellite orbiting the moon also takes about 90 min per revolution. Then which of the following is true ?

    [where ρm is density of the moon and ρe is density of the earth.]

  3. There are n elastic balls placed on a smooth horizontal plane. The masses of the balls are m, \(\dfrac{m}{2},\dfrac{m}{2^{2}},....\dfrac{m}{2^{n-1}}\) respectively. If the first ball hits the second ball with velocity v0, then the velocity of the nth ball will be,

  4. Acceleration due to gravity at a height H from the surface of a planet is the same as that at a depth of H below the surface. If R be the radius of the planet, then H vs. R graph for different planets will be,

  5. A mouse of mass m jumps on the outside edge of a rotating ceiling fan of moment of inertia I and radius R. The fractional loss of angular velocity of the fan as a result is,

  6. A body of mass 2 kg moves in a horizontal circular path of radius 5 m. At an instant, its speed is 2√5 m/s and is increasing at the rate of 3 m/s2. The magnitude of force acting on the body at that instant is,

  7. A particle of mass m is projected at a velocity u, making an angle θ with the horizontal (x-axis). If the angle of projection θ is varied keeping all other parameters same, then magnitude of angular momentum (L) at its maximum height about the point of projection varies with θ as,

  8. Horizontal pump cylinder: force F pushes a piston of area A, liquid leaves through an outlet orifice of area a

    As shown in the figure, a pump is designed as horizontal cylinder with a piston having area A and an outlet orifice having an area ‘a’. The piston moves with a constant velocity under the action of force F. If the density of the liquid is ρ, then the speed of the liquid emerging from the orifice is, (assume A >> a)

  9. As shown in the figure, a liquid is at same levels in two arms of a U-tube of uniform cross-section when at rest. If the U-tube moves with an acceleration ‘f’ towards right, the difference between liquid heights between two arms of the U-tube will be, (acceleration due to gravity = g)

    U-tube of base length a accelerating to the right with acceleration f, liquid levels in the two arms differing by h
  10. Two spheres S1 and S2 of masses m1 and m2 respectively collide with each other. Initially S1 is at rest and S2 is moving with velocity v along x-axis. After collision S2 has a velocity \(\dfrac{v}{2}\) in a direction perpendicular to the original direction. The sphere S1 moves after collision


Important Questions from Mechanics

  1. A soap bubble of surface tension $0.04 \text{ N/m}$ is blown to a diameter of $7 \text{ cm}$. If $(15000 - x) \text{ }\mu\text{J}$ of work is done in blowing it further to make its diameter $14 \text{ cm}$, then the value of $x$ is _______.
    ($\pi = 22/7$)
  2. A uniform solid cylinder of length $L$ and radius $R$ has moment of inertia about its axis equal to $I_1$. A small co-centric cylinder of length $L/2$ and radius $R/3$ carved from this cylinder has moment of inertia about its axis equals to $I_2$. The ratio $I_1/I_2$ is _______.
  3. A fly wheel having mass $3\text{ kg}$ and radius $5\text{ m}$ is free to rotate about a horizontal axis. A string having negligible mass is wound around the wheel and the loose end of the string is connected to $3\text{ kg}$ mass. The mass is kept at rest initially and released. Kinetic energy of the wheel when the mass descends by $3\text{ m}$ is _________ $\text{J}$. ($g = 10\text{ m/s}^{2}$)
  4. A fly wheel of mass $10$ kg and radius $50$ cm is rotating at a rate of$360$ rpm. Assuming mass to be concentrated at the rim, the constant retarding torque required to stop the rotation of wheel in $6$ rotations will be x Nm. The value of x is ____________.

  5. A body moving horizontally on a smooth surface with a speed of $20$ $ms^{-1}$ splits into two parts and continue to move in the same direction. The masses of two parts are in the ratio of $1:2$. The smaller part moves with a speed of $30$ $ms^{-1}$. The fractional change is the kinetic energy is given by $\frac{1}{x}$. The value of x is__________

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App