All Exams Test series for 1 year @ ₹349 only
Question

A homogenous anisotropic earthen dam of height $52$ m with a free board of $2$ m is constructed on an impermeable foundation. The horizontal and vertical hydraulic conductivities of soil used for the construction of the dam are $4.5\times10^{-8}$ m $s^{-1}$ and $2.0\times10^{-8}$ m $s^{-1}$, respectively. There are $6$ flow channels and $25$ equipotential drops in a square flownet drawn in the transformed dam section. If the downstream dam side is dry, the quantity of seepage per unit length through the dam in $m^3$ $day^{-1}$ $m^{-1}$ is ________ (rounded off to $3$ decimal places).

Anisotropic Earthen Dam Seepage Calculation

This solution details the calculation of seepage quantity per unit length through an anisotropic earthen dam using flownet analysis.

Given Data

  • Dam height, H = $52$ m
  • Free board = $2$ m
  • Horizontal hydraulic conductivity, $k_h = 4.5\times10^{-8}$ m s-1
  • Vertical hydraulic conductivity, $k_v = 2.0\times10^{-8}$ m s-1
  • Number of flow channels, $N_f = 6$
  • Number of equipotential drops, $N_d = 25$
  • Downstream condition: Dry

Anisotropic Seepage Formula

For anisotropic soils, seepage ($q$) calculated from a flownet on the transformed section uses the geometric mean of conductivities:

$q = \sqrt{k_h k_v} \times h \times \frac{N_f}{N_d}$

where h is the total head difference.

Step 1: Calculate Geometric Mean Hydraulic Conductivity

The geometric mean conductivity, $k_{geo}$, is:

$k_{geo} = \sqrt{k_h \times k_v}$

$k_{geo} = \sqrt{(4.5\times10^{-8} \text{ m s}^{-1}) \times (2.0\times10^{-8} \text{ m s}^{-1})}$

$k_{geo} = \sqrt{9.0\times10^{-16} \text{ m}^2 \text{ s}^{-2}}$

$k_{geo} = 3.0\times10^{-8} \text{ m s}^{-1}$

Step 2: Determine Total Head Difference ($h$)

Assuming the upstream water level corresponds to the dam height for calculating the head difference against a dry downstream side:

$h = 52 \text{ m}$

Step 3: Calculate Seepage Rate ($q$) in m³/s/m

Substitute values into the seepage formula:

$q = (3.0\times10^{-8} \text{ m s}^{-1}) \times (52 \text{ m}) \times \frac{6}{25}$

$q = 3.744\times10^{-7} \text{ m}^3 \text{ s}^{-1} \text{ m}^{-1}$

Step 4: Convert Seepage Rate to m³/day/m

To convert seconds to days, multiply by $86400$ seconds per day:

$q_{\text{day}} = q \times 86400 \text{ s day}^{-1}$

$q_{\text{day}} = (3.744\times10^{-7} \text{ m}^3 \text{ s}^{-1} \text{ m}^{-1}) \times (86400 \text{ s day}^{-1})$

$q_{\text{day}} = 0.03235136 \text{ m}^3 \text{ day}^{-1} \text{ m}^{-1}$

Final Rounded Result

Rounded to three decimal places, the seepage quantity per unit length is:

$0.032 \text{ m}^3 \text{ day}^{-1} \text{ m}^{-1}$

Was this answer helpful?

Important Questions from Seepage Analysis

  1. The seepage loss in cm2/sec for a hydraulic structure, if the flow net contains 5 flow lines and 9 equipotential lines and the head causing flow is 20 m, k= 2.6 x 10-6 cm/sec is:

  2. Due to the remolding of soil, a smear zone is formed around the sand drain during its  construction. Select the correct statement about the smear zone 
  3. A unit volume of a mass saturated soil is subjected to horizontal seepage. The saturated unit weight is 22 kN/m 3 and the hydraulic gradient is 0.3 the resultant body force on the soil mass is ______.

  4. Phreatic line in earthen dams has _______.
  5. The critical hydraulic gradient observed for sand boiling condition is given by:

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App