All Exams Test series for 1 year @ ₹349 only
Question

When drainage is permitted throughout the triaxial test, it is known as:

The correct answer is

CD test

Triaxial Testing and Drainage Conditions

Triaxial tests are commonly used in soil mechanics to determine the shear strength of soils under different stress and drainage conditions. The condition of drainage during the test significantly affects the measured strength parameters. A standard triaxial test involves placing a cylindrical soil specimen inside a cell, applying a confining pressure, and then applying an axial stress until failure.

There are different types of triaxial tests based on whether drainage is allowed during the consolidation phase (applying confining pressure) and the shearing phase (applying axial stress). Let's look at the options:

  • UC Test (Unconfined Compression Test): This is a special case of the triaxial test where the confining pressure is zero. Drainage is permitted during the shear phase. This test is typically used for cohesive soils. Drainage is not permitted during a consolidation phase as there is no confining pressure to consolidate against.
  • CU Test (Consolidated Undrained Test): In this test, drainage is permitted during the consolidation phase where the confining pressure is applied. However, drainage is prevented during the subsequent shear phase. Pore water pressure changes are measured during shear.
  • UU Test (Unconsolidated Undrained Test): In this test, drainage is not permitted during the initial application of the confining pressure (no consolidation) or during the subsequent shear phase. This test is very quick and does not allow for pore pressure dissipation.
  • CD Test (Consolidated Drained Test): In this test, drainage is permitted during both the consolidation phase and the shear phase. The test is conducted slowly enough to allow pore water pressures to dissipate fully as stresses are applied. This means effective stresses are known and controlled.

The question asks for the test where drainage is permitted throughout the triaxial test. This implies that drainage is allowed during both the initial stress application (consolidation) and the subsequent shearing phase. Based on the descriptions above, the CD test is the one where drainage is permitted throughout the entire testing process.

Was this answer helpful?

Important Questions from Shear Strength

  1. In-situ vane shear test is conducted to determine the shear strength of

  2. For saturated soil, Skempton's pore pressure coefficient B is

  3. The failure plane in direct shear test is:-

  4. In tri-axial compression test, the length of specimen is kept about ________ its diameter.

  5. The Mohr-Coulomb failure theory represents which of the following equation as the line that represents the failure envelope ?

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App