All Exams Test series for 1 year @ ₹349 only
Question

Consider the following information for the next three questions:

Three side of a trapezium are each equal to 6 cm. let \({\rm{\alpha }}\left( {0,\frac{{\rm{\pi }}}{2}} \right)\) be the angle between a pair of adjacent sides.

What is the maximum area of the trapezium?

This question was previously asked in
NDA I 2018 GAT Previous Year Paper (22-Apr-2018)
The correct answer is \(27\sqrt 3 \;{\rm{c}}{{\rm{m}}^2}\)

Understanding the Problem: Trapezium Geometry

The problem asks for the maximum possible area of a trapezium where three of its sides are equal to 6 cm. We are also given that \({\rm{\alpha }}\left( {0,\frac{{\rm{\pi }}}{2}} \right)\) is an angle between a pair of adjacent sides. This implies that \(\alpha\) represents an acute interior angle of the trapezium.

A trapezium has one pair of parallel sides. Let the side lengths be \(s_1, s_2, s_3, s_4\), where two are parallel. We are given that three of these lengths are 6 cm. Let the parallel sides be \(a\) and \(b\), and the non-parallel sides be \(c\) and \(d\). The possible configurations with three sides equal to 6 cm are limited.

  • Case 1: The two non-parallel sides and one parallel side are 6 cm. Let \(c=6, d=6\), and one parallel side (say \(a\)) is 6. The other parallel side \(b\) needs to be determined. This forms an isosceles trapezium.
  • Case 2: The two parallel sides and one non-parallel side are 6 cm. Let \(a=6, b=6\), and one non-parallel side (say \(c\)) is 6. If \(a\) and \(b\) are parallel and equal, the figure is a parallelogram. If three sides of a parallelogram are 6, it must be a rhombus with side length 6.

We need to consider which of these configurations can have an acute angle \(\alpha \in (0, \pi/2)\) between adjacent sides, and find the maximum area for each, then compare.

Analysing Configuration 1: Isosceles Trapezium (Legs and Shorter Base are 6 cm)

Consider an isosceles trapezium ABCD, where AB is parallel to CD. Let the non-parallel sides (legs) AD and BC be 6 cm, and the shorter parallel side CD be 6 cm. Let the acute angle at the base, \(\angle DAB = \angle CBA = \alpha\), where \({\rm{\alpha }} \in \left( {0,\frac{{\rm{\pi }}}{2}} \right)\). This angle is between adjacent sides (e.g., AD and AB).

To find the area, we need the height and the length of the other parallel side (AB).

Element Length/Value
Non-parallel sides (Legs) \(AD = BC = 6\) cm
Shorter parallel side \(CD = 6\) cm
Acute base angle \(\alpha \in (0, \pi/2)\)

Draw perpendiculars DP and CQ from D and C to the base AB. DP = CQ = height \(h\).

\(h = AD \sin \alpha = 6 \sin \alpha\)

\(AP = AD \cos \alpha = 6 \cos \alpha\)

Since CDQP is a rectangle, \(PQ = CD = 6\). The longer parallel side \(AB = AP + PQ + QB\). Since it's an isosceles trapezium, \(AP = QB\).

\(AB = 6 \cos \alpha + 6 + 6 \cos \alpha = 6 + 12 \cos \alpha\)

The area of the trapezium is \(A = \frac{1}{2}(\text{sum of parallel sides}) \times \text{height}\).

\(A(\alpha) = \frac{1}{2}(CD + AB)h = \frac{1}{2}(6 + (6 + 12 \cos \alpha))(6 \sin \alpha)\)

\(A(\alpha) = \frac{1}{2}(12 + 12 \cos \alpha)(6 \sin \alpha) = (6 + 6 \cos \alpha)(6 \sin \alpha)\)

\(A(\alpha) = 36 \sin \alpha (1 + \cos \alpha)\)

Maximizing the Area (Configuration 1)

To find the maximum area, we need to find the value of \(\alpha \in (0, \pi/2)\) that maximizes \(A(\alpha)\). We use differentiation.

\(\frac{dA}{d\alpha} = \frac{d}{d\alpha} [36 \sin \alpha (1 + \cos \alpha)]\)

Using the product rule: \(\frac{dA}{d\alpha} = 36 [\cos \alpha (1 + \cos \alpha) + \sin \alpha (-\sin \alpha)]\)

\(\frac{dA}{d\alpha} = 36 [\cos \alpha + \cos^2 \alpha - \sin^2 \alpha]\)

Using the identity \(\sin^2 \alpha = 1 - \cos^2 \alpha\):

\(\frac{dA}{d\alpha} = 36 [\cos \alpha + \cos^2 \alpha - (1 - \cos^2 \alpha)]\)

\(\frac{dA}{d\alpha} = 36 [\cos \alpha + 2 \cos^2 \alpha - 1]\)

To find critical points, set \(\frac{dA}{d\alpha} = 0\):

\(2 \cos^2 \alpha + \cos \alpha - 1 = 0\)

Let \(x = \cos \alpha\). The equation becomes \(2x^2 + x - 1 = 0\).

Factoring the quadratic equation:

\((2x - 1)(x + 1) = 0\)

This gives solutions \(x = \frac{1}{2}\) or \(x = -1\).

Substituting back \(x = \cos \alpha\):

\(\cos \alpha = \frac{1}{2}\) or \(\cos \alpha = -1\)

Given that \({\rm{\alpha }} \in \left( {0,\frac{{\rm{\pi }}}{2}} \right)\), \(\cos \alpha\) must be positive and less than 1. So, \(\cos \alpha = \frac{1}{2}\) is the only valid solution in this interval.

\(\cos \alpha = \frac{1}{2} \implies \alpha = \frac{\pi}{3}\)

The value \(\alpha = \frac{\pi}{3}\) lies within the given interval \((0, \pi/2)\).

To confirm this gives a maximum, we could use the second derivative test or analyze the sign of the first derivative around \(\alpha = \pi/3\). For \(\alpha = \pi/3\), the second derivative is negative, indicating a local maximum.

Calculating the Maximum Area (Configuration 1)

Substitute \(\alpha = \frac{\pi}{3}\) into the area formula \(A(\alpha) = 36 \sin \alpha (1 + \cos \alpha)\).

\(A_{max} = 36 \sin\left(\frac{\pi}{3}\right) \left(1 + \cos\left(\frac{\pi}{3}\right)\right)\)

We know \(\sin\left(\frac{\pi}{3}\right) = \frac{\sqrt{3}}{2}\) and \(\cos\left(\frac{\pi}{3}\right) = \frac{1}{2}\).

\(A_{max} = 36 \left(\frac{\sqrt{3}}{2}\right) \left(1 + \frac{1}{2}\right)\)

\(A_{max} = 36 \left(\frac{\sqrt{3}}{2}\right) \left(\frac{3}{2}\right)\)

\(A_{max} = \frac{36 \times 3 \sqrt{3}}{4}\)

\(A_{max} = 9 \times 3 \sqrt{3}\)

\(A_{max} = 27\sqrt{3} \;{\rm{c}}{{\rm{m}}^2}\)

Considering Other Configurations

Configuration 2: Isosceles Trapezium (Legs and Longer Base are 6 cm)

Let legs AD=BC=6 and longer base AB=6. Shorter base CD = \(6 - 12 \cos \alpha\), where \(\alpha\) is the acute angle at the longer base. For a valid trapezium, \(CD > 0\), so \(6 - 12 \cos \alpha > 0 \implies \cos \alpha < 1/2\). Since \(\alpha \in (0, \pi/2)\), this implies \(\pi/3 < \alpha < \pi/2\). The area is \(A(\alpha) = 36 \sin \alpha (1 - \cos \alpha)\). On the interval \((\pi/3, \pi/2)\), this function increases as \(\alpha\) increases (the derivative analysis showed critical point outside this range). The maximum area approaches the value at the boundary \(\alpha \to \pi/2\). As \(\alpha \to \pi/2\), Area \(\to 36 \sin(\pi/2)(1-\cos(\pi/2)) = 36(1)(1-0) = 36\). Note that \(36 < 27\sqrt{3}\).

Configuration 3: Rhombus (Side Length 6 cm)

A rhombus is a special case of a trapezium (with two pairs of parallel sides). If three sides are 6 cm, all four sides must be 6 cm. Let \(\alpha\) be the acute angle. The area is \(A(\alpha) = 6 \times 6 \sin \alpha = 36 \sin \alpha\). For \({\rm{\alpha }} \in \left( {0,\frac{{\rm{\pi }}}{2}} \right)\), the maximum area approaches 36 as \(\alpha \to \pi/2\). Again, \(36 < 27\sqrt{3}\).

Conclusion

Comparing the maximum areas from the possible configurations where three sides are 6 cm and there is an acute angle \(\alpha \in (0, \pi/2)\) between adjacent sides:

  • Isosceles Trapezium (legs=6, shorter base=6): Maximum Area = \(27\sqrt{3}\) cm\(^2\).
  • Isosceles Trapezium (legs=6, longer base=6): Maximum Area approaches 36 cm\(^2\).
  • Rhombus (side=6): Maximum Area approaches 36 cm\(^2\).

The overall maximum area is \(27\sqrt{3}\) cm\(^2\).

Final Answer

The maximum area of the trapezium is \(27\sqrt{3} \;{\rm{c}}{{\rm{m}}^2}\).

Revision Table: Trapezium Area Optimization

Concept Description Formula/Method
Trapezium Area Area of a quadrilateral with one pair of parallel sides. \(A = \frac{1}{2}(b_1 + b_2)h\), where \(b_1, b_2\) are parallel sides, \(h\) is height.
Isosceles Trapezium Trapezium with non-parallel sides equal. Legs are equal, base angles are equal.
Optimization using Calculus Finding maximum or minimum values of a function. Find critical points by setting first derivative to zero. Use second derivative test to confirm max/min.
Trigonometric Identities Relationships between trigonometric functions. \(\sin^2 \alpha + \cos^2 \alpha = 1\)

Additional Information: Properties of Trapezoids

A trapezium (or trapezoid) is a convex quadrilateral with at least one pair of parallel sides. Some sources require exactly one pair of parallel sides.

  • Bases: The parallel sides are called bases.
  • Legs: The non-parallel sides are called legs.
  • Height: The perpendicular distance between the parallel bases.
  • Isosceles Trapezium: A trapezium where the legs are equal in length. In an isosceles trapezium, the base angles are equal, and the diagonals are equal in length.
  • Right Trapezium: A trapezium with at least two right angles. This occurs when one of the non-parallel sides is perpendicular to the parallel bases.
  • Area Derivation: The area formula can be derived by dividing the trapezium into a rectangle and one or two triangles. For an isosceles trapezium, it's a rectangle and two congruent right triangles.

When solving geometry problems involving maximization, consider different possible configurations of the given constraints (like side lengths being equal) and use calculus to find the maximum value of the area function in terms of the variable angle.

Was this answer helpful?

Similar Questions

  1. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  2. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

  3. What is the common difference of the AP so that the product of first, fourth and fifth terms is greatest?

  4. What is the first term of the AP so that the product of the first, fourth and fifth terms is greatest?

  5. The radius of a circle is increasing at the rate of 0.7 cm/sec. What is the rate of increase of its circumference?

  6. Consider the following statements:

    1. The function f(x) = ln x increases in the interval (0, ∞).

    2. The function f(x) = tan x increases in the interval  \(\rm \left(- \dfrac{\pi}{2}, \dfrac{\pi}{2}\right)\)  .

    Which of the above statements is / are correct?

  7. Let y = 3x 2 + 2. If x changes from 10 to 10.1, then what is the total change in y?

  8. Let l be the length and b be the breadth of a rectangle such that l + b = k. What is the maximum area of rectangle?

  9. If the area of the trapezium is the maximum possible, then what is α equal to?

  10. If the area of the trapezium is maximum, what is the length of fourth side?


Important Questions from Applications of Derivatives

  1. Given total cost function $C = 5Q^2 + 20Q + 5$, at price = ₹ 5 marginal cost is
  2. The sources of auto correlation among the following are :
    I. Omitted explanatory variables
    II. Interpolation in the statistical observation
    III. Mis-specification of the true random term ‘v’
    IV. Economic variables to move together over time
    Codes :
  3. During which year, gross domestic savings of the public sector turned negative in the Indian economy ?
    I. 1990 – 91
    II. 1995 – 96
    III. 1999 – 2000
    IV. 2002 – 2003
    Codes :
  4. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  5. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

Need Expert Advice?
Test Series
NDA img
Defence
NDA 2026 Mock Test Series (Latest Pattern)
526 Tests 1 Tests Free
1202 Attempts
4.7(163)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App