All Exams Test series for 1 year @ ₹349 only
Question

Consider the following for the next two (02) items that follow:

The sixth term of an AP is 2 and its common difference is greater than one.

What is the first term of the AP so that the product of the first, fourth and fifth terms is greatest?

This question was previously asked in
NDA I 2016 GAT Previous Year Paper (17-Apr-2016)
The correct answer is

-6

Understanding the Problem: Maximizing Product in an Arithmetic Progression

The problem asks us to find the first term ('a') of an Arithmetic Progression (AP) given specific conditions. We are told that the sixth term of the AP is 2, and the common difference ('d') is greater than 1. The objective is to determine the value of the first term ('a') that leads to the greatest possible product when multiplying the first, fourth, and fifth terms of this AP.

This is an optimization problem within the context of arithmetic progressions.

Setting up the Arithmetic Progression Properties

An Arithmetic Progression is defined by a sequence of numbers where the difference between any two consecutive terms is constant. This constant is the common difference, denoted by 'd'.

The general formula to find the n-th term of an AP is:

\[ a_n = a + (n-1)d \]

where 'a' represents the first term and 'd' is the common difference.

We are given that the sixth term (\(a_6\)) of the AP is 2. Using the formula with \(n=6\), we have:

\[ a_6 = a + (6-1)d = a + 5d \]

So, we can write the equation based on the given information:

\[ a + 5d = 2 \]

This equation connects the first term 'a' and the common difference 'd'. We can express 'a' in terms of 'd' from this equation:

\[ a = 2 - 5d \]

We are also given an important constraint: the common difference \(d > 1\).

Expressing Terms and Product in Terms of Common Difference 'd'

The problem requires us to maximize the product of the first, fourth, and fifth terms of the AP. Let's first write these terms using the general AP formula \(a_n = a + (n-1)d\):

  • First term: \(a_1 = a\)
  • Fourth term: \(a_4 = a + (4-1)d = a + 3d\)
  • Fifth term: \(a_5 = a + (5-1)d = a + 4d\)

Now, to work with a single variable, we substitute the relationship \(a = 2 - 5d\) into the expressions for each term:

  • First term: \(a_1 = 2 - 5d\)
  • Fourth term: \(a_4 = (2 - 5d) + 3d = 2 - 2d\)
  • Fifth term: \(a_5 = (2 - 5d) + 4d = 2 - d\)

The product of these three terms, let's call it \(P\), is given by:

\[ P = a_1 \times a_4 \times a_5 = (2 - 5d)(2 - 2d)(2 - d) \]

We need to find the value of 'd' (keeping in mind that \(d > 1\)) that makes this product \(P\) the greatest. Once we find this optimal value for 'd', we can determine the first term 'a' using the equation \(a = 2 - 5d\).

Finding the Value of 'd' for Greatest Product

To find the value of 'd' that maximizes the product function \(P(d)\) for \(d > 1\), we can use methods from calculus. First, let's expand the expression for \(P(d)\) into a polynomial in 'd':

\[ P(d) = (2 - 5d)(2 - 2d)(2 - d) \]

Expand the first two factors:

\[ (2 - 5d)(2 - 2d) = 4 - 4d - 10d + 10d^2 = 10d^2 - 14d + 4 \]

Now multiply the result by the third factor \((2 - d)\):

\[ P(d) = (10d^2 - 14d + 4)(2 - d) \] \[ P(d) = 10d^2(2) + 10d^2(-d) - 14d(2) - 14d(-d) + 4(2) + 4(-d) \] \[ P(d) = 20d^2 - 10d^3 - 28d + 14d^2 + 8 - 4d \]

Combine like terms:

\[ P(d) = -10d^3 + (20d^2 + 14d^2) + (-28d - 4d) + 8 \] \[ P(d) = -10d^3 + 34d^2 - 32d + 8 \]

To find the value of 'd' where the product \(P(d)\) is maximum, we differentiate \(P(d)\) with respect to 'd' and set the derivative \(P'(d)\) equal to zero. This gives us the critical points where the slope of the function is zero, which are potential locations for maximum or minimum values.

\[ P'(d) = \frac{dP}{dd} = \frac{d}{dd}(-10d^3 + 34d^2 - 32d + 8) \] \[ P'(d) = -3 \times 10d^{3-1} + 2 \times 34d^{2-1} - 1 \times 32d^{1-1} + 0 \] \[ P'(d) = -30d^2 + 68d - 32 \]

Set \(P'(d) = 0\) to find the critical points:

\[ -30d^2 + 68d - 32 = 0 \]

We can divide the entire equation by -2 to simplify:

\[ 15d^2 - 34d + 16 = 0 \]

This is a quadratic equation in the form \(ad^2 + bd + c = 0\). We can solve for 'd' using the quadratic formula:

\[ d = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} \]

Here, \(a=15\), \(b=-34\), and \(c=16\). Substitute these values into the formula:

\[ d = \frac{-(-34) \pm \sqrt{(-34)^2 - 4(15)(16)}}{2(15)} \] \[ d = \frac{34 \pm \sqrt{1156 - 960}}{30} \] \[ d = \frac{34 \pm \sqrt{196}}{30} \] \[ d = \frac{34 \pm 14}{30} \]

This gives us two possible values for 'd':

\[ d_1 = \frac{34 + 14}{30} = \frac{48}{30} = \frac{8}{5} = 1.6 \] \[ d_2 = \frac{34 - 14}{30} = \frac{20}{30} = \frac{2}{3} \]

The problem specifies that the common difference must be greater than one (\(d > 1\)). Comparing our two solutions for 'd' with this condition, we see that \(d_1 = 1.6\) satisfies \(d > 1\), while \(d_2 = 2/3 \approx 0.67\) does not.

Therefore, the value of 'd' that is relevant to our problem and corresponds to a critical point is \(d = 1.6\).

Further analysis (such as using the second derivative test or evaluating the function \(P(d)\) for values around \(d=1.6\) and considering the behavior as \(d\) approaches the boundary \(d=1\)) confirms that this value of \(d = 1.6\) indeed corresponds to the maximum value for the product \(P(d)\) within the specified domain \(d > 1\).

Calculating the First Term of the AP

Now that we have found the value of the common difference 'd' that maximizes the product, which is \(d = 1.6\) or \(d = 8/5\), we can find the corresponding first term 'a' using the relationship we derived earlier:

\[ a = 2 - 5d \]

Substitute the value \(d = 8/5\) into this equation:

\[ a = 2 - 5 \left(\frac{8}{5}\right) \] \[ a = 2 - 8 \] \[ a = -6 \]

So, the first term of the AP that satisfies the given conditions and maximizes the product of the first, fourth, and fifth terms is -6.

Revision Table: Key AP Concepts and Formulas

ConceptFormula/Description
Arithmetic Progression (AP)A sequence where the difference between consecutive terms is constant.
First TermThe initial term of the AP, denoted by 'a'.
Common DifferenceThe constant difference between consecutive terms, denoted by 'd'.
n-th Term of AP\(a_n = a + (n-1)d\)

Additional Information: Optimization Problems

Optimization problems are common in mathematics and various fields. They involve finding the best possible value (either maximum or minimum) of a function subject to certain constraints. In this problem, the function to be optimized was the product of three terms of the AP, expressed in terms of the common difference 'd'. The constraint was that the common difference must be greater than 1. Calculus provides systematic methods (like finding derivatives and analyzing critical points) to solve such problems, helping us determine the conditions under which a function attains its maximum or minimum value within a given domain.

Was this answer helpful?

Similar Questions

  1. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  2. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

  3. What is the common difference of the AP so that the product of first, fourth and fifth terms is greatest?

  4. The radius of a circle is increasing at the rate of 0.7 cm/sec. What is the rate of increase of its circumference?

  5. Consider the following statements:

    1. The function f(x) = ln x increases in the interval (0, ∞).

    2. The function f(x) = tan x increases in the interval  \(\rm \left(- \dfrac{\pi}{2}, \dfrac{\pi}{2}\right)\)  .

    Which of the above statements is / are correct?

  6. Let y = 3x 2 + 2. If x changes from 10 to 10.1, then what is the total change in y?

  7. Let l be the length and b be the breadth of a rectangle such that l + b = k. What is the maximum area of rectangle?

  8. If the area of the trapezium is the maximum possible, then what is α equal to?

  9. If the area of the trapezium is maximum, what is the length of fourth side?

  10. What is the maximum area of the trapezium?


Important Questions from Applications of Derivatives

  1. Given total cost function $C = 5Q^2 + 20Q + 5$, at price = ₹ 5 marginal cost is
  2. The sources of auto correlation among the following are :
    I. Omitted explanatory variables
    II. Interpolation in the statistical observation
    III. Mis-specification of the true random term ‘v’
    IV. Economic variables to move together over time
    Codes :
  3. During which year, gross domestic savings of the public sector turned negative in the Indian economy ?
    I. 1990 – 91
    II. 1995 – 96
    III. 1999 – 2000
    IV. 2002 – 2003
    Codes :
  4. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  5. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

Need Expert Advice?
Test Series
NDA img
Defence
NDA 2026 Mock Test Series (Latest Pattern)
526 Tests 1 Tests Free
1202 Attempts
4.7(163)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App