All Exams Test series for 1 year @ ₹349 only
Question

Consider the following information for the next three questions:

Three side of a trapezium are each equal to 6 cm. let \({\rm{\alpha }}\left( {0,\frac{{\rm{\pi }}}{2}} \right)\) be the angle between a pair of adjacent sides.

If the area of the trapezium is maximum, what is the length of fourth side?

This question was previously asked in
NDA I 2018 GAT Previous Year Paper (22-Apr-2018)
The correct answer is

12 cm

Understanding the Trapezium Problem

The problem describes a trapezium where three of its sides are equal to 6 cm. We are also given that \( \alpha \) is the angle between a pair of adjacent sides, with \( 0 < \alpha < \frac{\pi}{2} \). We need to find the length of the fourth side when the area of the trapezium is maximum.

A trapezium has one pair of parallel sides. Let the trapezium be ABCD, with AB parallel to CD.

There are a few ways three sides can be equal to 6 cm in a trapezium:

  1. The two non-parallel sides and one parallel side are 6 cm. This is an isosceles trapezium.
  2. The two parallel sides and one non-parallel side are 6 cm.
  3. Three consecutive sides are 6 cm. This falls under case 1 if the consecutive sides include one parallel and two non-parallel, or case 2 if the consecutive sides are the two parallel and one non-parallel.

Given the condition \( 0 < \alpha < \frac{\pi}{2} \) for an angle between adjacent sides, and considering common trapezium problems, the most likely configuration is an isosceles trapezium where the two non-parallel sides and the shorter parallel side are equal to 6 cm. Let's assume this configuration as it leads to one of the provided options.

Let the trapezium be ABCD, with AB parallel to CD. Assume the non-parallel sides are AD and BC, and the shorter parallel side is CD. So, \( AD = BC = CD = 6 \) cm.

The angle \( \alpha \) is between a pair of adjacent sides. Since \( 0 < \alpha < \frac{\pi}{2} \), \( \alpha \) must be an acute angle. In an isosceles trapezium, the acute angles are the base angles formed by the longer parallel side and the non-parallel sides. Let \( \angle DAB = \angle CBA = \alpha \).

The fourth side is the longer parallel side, AB.

Calculating the Area of the Trapezium

Consider the isosceles trapezium ABCD with \( AD = BC = CD = 6 \) and AB parallel to CD. Let \( \angle DAB = \alpha \).

To find the area, we need the lengths of the parallel sides (CD and AB) and the height (h).

  • The shorter parallel side is \( CD = 6 \) cm.
  • To find the longer parallel side AB, draw perpendiculars from D and C to AB, meeting AB at points E and F respectively.
  • Triangle ADE is a right-angled triangle with hypotenuse AD = 6 and angle \( \angle DAE = \alpha \).
  • The height of the trapezium is \( h = DE = AD \sin \alpha = 6 \sin \alpha \).
  • The length AE is \( AD \cos \alpha = 6 \cos \alpha \). Similarly, \( BF = BC \cos \alpha = 6 \cos \alpha \).
  • Since DEFC is a rectangle, \( EF = CD = 6 \).
  • The longer parallel side is \( AB = AE + EF + FB = 6 \cos \alpha + 6 + 6 \cos \alpha = 6 + 12 \cos \alpha \).

Note that for a valid trapezium with CD as the shorter base and AB as the longer base, we require AB > CD. \( 6 + 12 \cos \alpha > 6 \implies 12 \cos \alpha > 0 \implies \cos \alpha > 0 \). This is true for \( 0 < \alpha < \frac{\pi}{2} \).

The area of the trapezium is given by the formula:

\( \text{Area} = \frac{1}{2} (\text{sum of parallel sides}) \times \text{height} \)

\( A(\alpha) = \frac{1}{2} (CD + AB) \times h \)

\( A(\alpha) = \frac{1}{2} (6 + (6 + 12 \cos \alpha)) \times (6 \sin \alpha) \)

\( A(\alpha) = \frac{1}{2} (12 + 12 \cos \alpha) \times (6 \sin \alpha) \)

\( A(\alpha) = (6 + 6 \cos \alpha) \times (6 \sin \alpha) \)

\( A(\alpha) = 36 (1 + \cos \alpha) \sin \alpha \)

Maximizing the Trapezium Area

To find the angle \( \alpha \) that maximizes the area, we need to differentiate the area function \( A(\alpha) \) with respect to \( \alpha \) and set the derivative equal to zero.

\( A(\alpha) = 36 (\sin \alpha + \cos \alpha \sin \alpha) \)

Using the identity \( \cos \alpha \sin \alpha = \frac{1}{2} \sin(2\alpha) \), we get:

\( A(\alpha) = 36 (\sin \alpha + \frac{1}{2} \sin(2\alpha)) \)

Now, differentiate with respect to \( \alpha \):

\( \frac{dA}{d\alpha} = 36 \left( \frac{d}{d\alpha}(\sin \alpha) + \frac{1}{2} \frac{d}{d\alpha}(\sin(2\alpha)) \right) \)

\( \frac{dA}{d\alpha} = 36 (\cos \alpha + \frac{1}{2} \times 2 \cos(2\alpha)) \)

\( \frac{dA}{d\alpha} = 36 (\cos \alpha + \cos(2\alpha)) \)

Set the derivative to zero to find critical points:

\( \cos \alpha + \cos(2\alpha) = 0 \)

Using the identity \( \cos(2\alpha) = 2 \cos^2 \alpha - 1 \):

\( \cos \alpha + (2 \cos^2 \alpha - 1) = 0 \)

\( 2 \cos^2 \alpha + \cos \alpha - 1 = 0 \)

This is a quadratic equation in terms of \( \cos \alpha \). Let \( x = \cos \alpha \). The equation is \( 2x^2 + x - 1 = 0 \).

Factoring the quadratic equation:

\( (2x - 1)(x + 1) = 0 \)

This gives two possible values for \( x = \cos \alpha \):

\( \cos \alpha = \frac{1}{2} \) or \( \cos \alpha = -1 \)

The problem states that \( 0 < \alpha < \frac{\pi}{2} \). In this range, \( \cos \alpha \) is strictly between 0 and 1.

  • \( \cos \alpha = -1 \) corresponds to \( \alpha = \pi \), which is outside the given range.
  • \( \cos \alpha = \frac{1}{2} \) corresponds to \( \alpha = \frac{\pi}{3} \), which is within the given range \( (0, \frac{\pi}{2}) \).

To confirm that \( \alpha = \frac{\pi}{3} \) corresponds to a maximum, we can check the second derivative or analyze the sign of the first derivative around \( \alpha = \frac{\pi}{3} \).

\( \frac{d^2A}{d\alpha^2} = 36 (-\sin \alpha - 2 \sin(2\alpha)) \)

At \( \alpha = \frac{\pi}{3} \):

\( \sin(\frac{\pi}{3}) = \frac{\sqrt{3}}{2} \)

\( \sin(2 \times \frac{\pi}{3}) = \sin(\frac{2\pi}{3}) = \frac{\sqrt{3}}{2} \)

\( \frac{d^2A}{d\alpha^2} = 36 (-\frac{\sqrt{3}}{2} - 2 \times \frac{\sqrt{3}}{2}) = 36 (-\frac{\sqrt{3}}{2} - \sqrt{3}) = 36 (-\frac{3\sqrt{3}}{2}) = -54\sqrt{3} \)

Since the second derivative is negative, \( \alpha = \frac{\pi}{3} \) corresponds to a local maximum for the area.

Finding the Length of the Fourth Side

The fourth side of the trapezium is the longer base, AB, with length \( 6 + 12 \cos \alpha \).

When the area is maximum, we have \( \cos \alpha = \frac{1}{2} \).

Length of the fourth side \( = 6 + 12 \times \frac{1}{2} \)

Length of the fourth side \( = 6 + 6 \)

Length of the fourth side \( = 12 \) cm.

Thus, when the area of the trapezium is maximum under the given conditions, the length of the fourth side is 12 cm.

Property Value/Expression
Equal Sides Length 6 cm
Angle \( \alpha \) Range \( (0, \frac{\pi}{2}) \)
Assumed Configuration Isosceles trapezium with CD=AD=BC=6
Shorter Parallel Side (CD) 6 cm
Non-Parallel Sides (AD, BC) 6 cm
Longer Parallel Side (AB) \( 6 + 12 \cos \alpha \)
Height (h) \( 6 \sin \alpha \)
Area Function \( A(\alpha) \) \( 36(1 + \cos \alpha) \sin \alpha \)
Value of \( \cos \alpha \) for Max Area \( \frac{1}{2} \)
Corresponding Angle \( \alpha \) \( \frac{\pi}{3} \)
Length of Fourth Side (AB) \( 12 \) cm

Revision Table: Trapezium Area Maximization

Step Description Formula / Condition
1 Identify trapezium type & sides Isosceles, 3 sides = 6cm, AB || CD
2 Define variables \( CD=AD=BC=6 \), \( \angle DAB = \alpha \), \( 0 < \alpha < \frac{\pi}{2} \)
3 Find height (h) \( h = 6 \sin \alpha \)
4 Find length of fourth side (AB) \( AB = 6 + 12 \cos \alpha \)
5 Write area formula \( A(\alpha) = \frac{1}{2} (CD+AB)h \)
6 Substitute and simplify area \( A(\alpha) = 36(1+\cos \alpha)\sin \alpha \)
7 Differentiate area w.r.t. \( \alpha \) \( \frac{dA}{d\alpha} = 36(\cos \alpha + \cos(2\alpha)) \)
8 Set derivative to zero \( \cos \alpha + \cos(2\alpha) = 0 \)
9 Solve for \( \cos \alpha \) \( \cos \alpha = \frac{1}{2} \) (for \( 0 < \alpha < \frac{\pi}{2} \))
10 Find optimal \( \alpha \) \( \alpha = \frac{\pi}{3} \)
11 Calculate fourth side length \( AB = 6 + 12 \cos(\frac{\pi}{3}) = 12 \) cm

Additional Information on Trapezium Area Optimization

When optimizing the area of a geometric shape under certain constraints, calculus is a powerful tool. In this problem, expressing the area as a function of the angle \( \alpha \) allowed us to use differentiation to find the maximum value. It was crucial to correctly identify the type of trapezium configuration based on the input information and the domain of the angle \( \alpha \).

While other configurations of three equal sides exist for a trapezium (e.g., the longer base and the two non-parallel sides being equal), we showed that assuming the shorter base and the two non-parallel sides are equal to 6 cm, with \( \alpha \) being the base angle with the longer base, leads to a solvable optimization problem whose result matches one of the given options. This suggests that this was the intended configuration for the question.

The condition \( 0 < \alpha < \frac{\pi}{2} \) is significant as it restricts the possible values of \( \alpha \) and \( \cos \alpha \), helping us choose the correct solution from the trigonometric equation.

Was this answer helpful?

Similar Questions

  1. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  2. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

  3. What is the common difference of the AP so that the product of first, fourth and fifth terms is greatest?

  4. What is the first term of the AP so that the product of the first, fourth and fifth terms is greatest?

  5. The radius of a circle is increasing at the rate of 0.7 cm/sec. What is the rate of increase of its circumference?

  6. Consider the following statements:

    1. The function f(x) = ln x increases in the interval (0, ∞).

    2. The function f(x) = tan x increases in the interval  \(\rm \left(- \dfrac{\pi}{2}, \dfrac{\pi}{2}\right)\)  .

    Which of the above statements is / are correct?

  7. Let y = 3x 2 + 2. If x changes from 10 to 10.1, then what is the total change in y?

  8. Let l be the length and b be the breadth of a rectangle such that l + b = k. What is the maximum area of rectangle?

  9. If the area of the trapezium is the maximum possible, then what is α equal to?

  10. What is the maximum area of the trapezium?


Important Questions from Applications of Derivatives

  1. Given total cost function $C = 5Q^2 + 20Q + 5$, at price = ₹ 5 marginal cost is
  2. The sources of auto correlation among the following are :
    I. Omitted explanatory variables
    II. Interpolation in the statistical observation
    III. Mis-specification of the true random term ‘v’
    IV. Economic variables to move together over time
    Codes :
  3. During which year, gross domestic savings of the public sector turned negative in the Indian economy ?
    I. 1990 – 91
    II. 1995 – 96
    III. 1999 – 2000
    IV. 2002 – 2003
    Codes :
  4. What is the curve which passes through the point (1, 1) and whose slope is \(\frac{{2y}}{x}?\)

  5. If the function f(x) = x 2- kx is monotonically increasing in the interval (1, ∞), then which one of the following is correct?

Need Expert Advice?
Test Series
NDA img
Defence
NDA 2026 Mock Test Series (Latest Pattern)
526 Tests 1 Tests Free
1202 Attempts
4.7(163)
English, Hindi

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App