All Exams Test series for 1 year @ ₹349 only
Question

The IS code used to perform a standard penetration test is:

The correct answer is

IS 2131

The Standard Penetration Test (SPT) is a common in-situ test method used in geotechnical engineering to determine the strength and compressibility characteristics of soils. It is widely used for subsurface exploration, especially for granular soils and stiff cohesive soils.

Standard Penetration Test (SPT) IS Code

The procedure for conducting the Standard Penetration Test in India is standardized by the Indian Standards (IS) code. This code provides detailed guidelines on the apparatus, testing procedure, recording of data, and interpretation of results for the SPT.

Let's look at the provided IS codes:

  • IS 2720: This is a series of IS codes dealing with methods of test for soils. It covers various tests like moisture content, specific gravity, sieve analysis, Atterberg limits, compaction tests, etc. It does not specifically detail the SPT procedure.
  • IS 2131: This IS code specifically details the procedure for the Standard Penetration Test for soils. It outlines how the split spoon sampler should be driven, the height of fall of the hammer, the weight of the hammer, and how the penetration resistance (N value) is recorded.
  • IS 2386: This is a series of IS codes related to methods of test for aggregates for concrete. It covers tests like sieve analysis, specific gravity, bulk density, crushing strength, impact value, etc., for aggregates. It is not related to soil testing like SPT.
  • IS 456: This IS code is the Indian Standard code of practice for plain and reinforced concrete. It deals with the design and construction aspects of concrete structures. It is a structural code, not a soil testing code.

Therefore, the specific IS code used to perform a Standard Penetration Test is IS 2131.

Was this answer helpful?

Important Questions from Shallow Foundation

  1. Which one of the following provides required depth of foundation of a retaining wall?

    Where q: bearing capacity; γ unit weight of the soil; ϕ: angle of repose; B: width of foundation
  2. According to Rankine's formula minimum depth of foundation when q = 180 kN/m 2, γ = 20 kN/m 3and ϕ = 30° is -

  3. The maximum permissible settlement as per IS-1904(1966) for an isolated foundations are :

  4. Temporary structure constructed in a river or lake for excluding water from a given site is termed as ________.

  5. The observed value of the standard penetration (N) at 10 m depth of silty sand deposit is 13. The unit weight of the soil is 16 kN/m 3. The N value after correcting for the presence of fines will be:

Need Expert Advice?

Start Your Preparation with Prepp Mobile App

Download the app from Google Play & App Store
Download the app from Google Play & App Store
Prepp Mobile App