According to Rankine's formula minimum depth of foundation when q = 180 kN/m 2, γ = 20 kN/m 3and ϕ = 30° is -
1.0 m
The question asks us to determine the minimum depth of foundation using Rankine's formula. This formula is a fundamental concept in soil mechanics and geotechnical engineering, used to ensure the stability and safety of a foundation against bearing capacity failure, especially considering the soil's properties.
To calculate the minimum depth of foundation using Rankine's formula, we are provided with the following critical soil parameters:
Rankine's formula for the minimum depth of foundation (\(D_f\)) is given by the equation:
\[D_f = \frac{q}{\gamma} \left( \frac{1 - \sin\varphi}{1 + \sin\varphi} \right)^2\]
This formula is derived from the principles of earth pressure theory, specifically considering the active earth pressure coefficient. It helps in determining a safe depth for shallow foundations where lateral stability is a concern for proper foundation design.
Let's substitute the given values into Rankine's formula to find the minimum depth of foundation.
The calculated minimum depth of foundation according to Rankine's formula is \(1.0 \text{ m}\). This depth is crucial for the proper foundation design and overall stability of the structure.
| Parameter | Value | Unit |
|---|---|---|
| Ultimate bearing capacity (\(q\)) | 180 | kN/m2 |
| Unit weight of soil (\(\gamma\)) | 20 | kN/m3 |
| Angle of internal friction (\(\varphi\)) | 30° | Degrees |
| Calculated Minimum Depth of Foundation (\(D_f\)) | 1.0 | m |
Which one of the following provides required depth of foundation of a retaining wall?
Where q: bearing capacity; γ unit weight of the soil; ϕ: angle of repose; B: width of foundationThe maximum permissible settlement as per IS-1904(1966) for an isolated foundations are :
Temporary structure constructed in a river or lake for excluding water from a given site is termed as ________.
The IS code used to perform a standard penetration test is:
The observed value of the standard penetration (N) at 10 m depth of silty sand deposit is 13. The unit weight of the soil is 16 kN/m 3. The N value after correcting for the presence of fines will be: